THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bedding the Savage VLD??
 Login/Join
 
one of us
Picture of DannoBoone
posted
I managed to get the discontinued Savage 112 VLD in .25-06
caliber (NIB even!), and want to bed it. Has anyone done this
with a VLD with its blind magazine?

Both pillars are slightly recessed below the wood (even at the
center where the bottom contour of the action should make
contact). My 10MLII was the same way, so enough wood was removed
for contact with the center of each pillar. However, this VLD
has a 90 degree clip which is apparently holding in the blind
magazine. The end of it partially covers the rear pillar. How
does one go about bedding this area? Thanks

Danno


************************

Our independence is dying.
 
Posts: 565 | Location: Walker, IA, USA | Registered: 03 December 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia