The Accurate Reloading Forums
CZ 550 9,3x62 restocking question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/2331077201

08 February 2009, 19:26
Flip
CZ 550 9,3x62 restocking question
I have a 9.3x62 which is getting a new Synthetic stock, question is my cz has an additional recoil lug under the barrel, for best accuracy should I have it removed, the gun is gone be free flouted, how does the extra recoil lug influence accuracy
08 February 2009, 19:32
jeffeosso
leave it.. in fact, use it.. the cz big bore have a reputation for accuracy, and they all use that lug.

but, if you are going to float it, leave it there.. then if you need to, you can rebed it and tie it down


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
08 February 2009, 20:11
Oregon45
I removed the lug from mine (it is dovetailed into the bottom of the barrel) when I put my 9.3x62 into a McMillan stock. It shoots just as well now as it did with the lug bedded into the factory stock.
09 February 2009, 07:19
jeffeosso
so, apparently the cost of removing it didn't improve the accuracy (LOL - just kidding)

leave it or don't


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com