THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Value of this oberndorf kurtz action?
 Login/Join
 
One of Us
posted
I'm being offered this gun which I would strip for the action.

It's an oberndorf kurz with matching numbers but there is no visible lettering on the left rail.
Is bottom metal available for it?

I know the pics aren't good but assume no pitting below the stock. I can probably get $80 for the scope and maybe $60 for the shilen bbl.

Advise on mkt value for this action would be much appreciated.

Thx!

Mike



 
Posts: 718 | Location: Utah | Registered: 14 September 2008Reply With Quote
One of Us
Picture of gunmaker
posted Hide Post
Mexican?
Ejection port looks close to 3" long.
Kurz is closer to 2 1/2".


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1862 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
One of Us
posted Hide Post
I asked him if it was mex - he swore it was oberndorf.
Here's another pic. Thumb slot looks like mex to me. It's currently chambered for 7 x 57 which says mex as well.
I've never studied Kurz actions so appreciate your help.

 
Posts: 718 | Location: Utah | Registered: 14 September 2008Reply With Quote
one of us
Picture of ForrestB
posted Hide Post
quote:
Originally posted by Nomo4me:
I asked him if it was mex - he swore it was oberndorf.


Well in that case, $20,000. NOT.

A 7X57 won't fit in a kurz action.


______________________________
"Truth is the daughter of time."
Francis Bacon
 
Posts: 5052 | Location: Muletown | Registered: 07 September 2001Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Ditto what forresdt said. The Kurz is TOO short for a 7x57. Its a taco/barrito mauser.

get us some a good clear closeups of the right & left sides of the action.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
Picture of kcstott
posted Hide Post
The other thing is, Even if it was a Kurtz, With no factory markings It would have lost a tremendous amount of value.


www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
 
Posts: 2534 | Location: National City CA | Registered: 15 December 2008Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
its a mexican .. canjar single set trigger (which is kinda cool), redfield base - I've never seen a kurtz redfield

the dead giveaway will be the screw spacing .. mexican is 7.6, kurz is 7.225 ..

bolt length is also easy -- mexican is 6.08, kurz is 5.76.. if the bolt fits in a 6" caliber EASILY, then maybe ..

i believe its a 1910/36 mexican ... take off the scope base and see ...

$350 for the whole gun .. if it was an unmolested mexican, 250 for the action alone .. the trigger IS cool, though.


here's a REALLY cool kurz
http://forums.accuratereloadin...=432102065#432102065


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40057 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
posted Hide Post
Looks like a Mexican to me as well, though I'd guess a 1910 given the lack of Springfield style cocking piece and what appears to be the lack of the vent hole on the left side of the receiver.
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
one of us
posted Hide Post
What is the distance between the guard screws? Loks like ans intermediate length SR M98. Probably Mexican. Maybe $500 in good shape.
 
Posts: 3837 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
Thanks for the replies. At present I've declined to purchase it at $550 with the nikon buckmaster scope and two boxes factory ammo. Bbl is a Shilen.
 
Posts: 718 | Location: Utah | Registered: 14 September 2008Reply With Quote
One of Us
posted Hide Post
Isn't it "Kurz", meaning small? I had one a while back done by Earl Milleron with a broke stock. Never should have sold it.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5533 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
kurz - short
klein - small


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40057 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia