THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    How to reshape wood stock having excessive drop at heel and comb?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
How to reshape wood stock having excessive drop at heel and comb?
 Login/Join
 
One of Us
posted
With a [wood] rifle stock whose drop at heel and comb are excessive, can wood be grafted somehow to top of butt that can be shaped to compensate the drop? Replacing the stock would be much costlier than I can handle. And using some sort of strap-on or other temporary device to raise these drops looks terrible to me.

I think I vaguely remember reading in The Modern Gunsmith by James Howe a procedure for gluing and dowel pinning wood, the addition being nearly invisible. Howe then shaped the wood "graft" to dimensions wanted. But Howe, if I remember correctly, was writing more than 60 years ago.

There must be several ways to achieve the result, and gunsmiths or stock makers who do this type of repair? I will appreciate information and contacts to do what need be done.


It's so simple to be wise. Just think of something stupid to say and then don't say it. Sam Levinson
 
Posts: 1528 | Location: Seeley Lake | Registered: 21 November 2007Reply With Quote
One of Us
Picture of sambarman338
posted Hide Post
English gunmakers have been known to bend stocks after applying steam. They would be doing it to slim straight hands, of course, and it might not work with a tight pistol grip.

If it is a stock of some value, you could buy or make a leather cheekpiece to lift your face, at least. I made one for a sporterised Mauser once and it worked well and never smacked me in the face the way wood can. Under recoil it moved forward with the my cheek - wish I'd kept it.
 
Posts: 5188 | Location: Melbourne, Australia | Registered: 31 March 2009Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
A leather cheekpiece would look a lot better than trying to graft wood on top.

Trying to alter you stock won't be cheap either. Not knowing what the stock is from my first thought would be look for a take off.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
Of course you can do almost anything with wood, add on take off etc. And the job can be decent looking depending on time and $ spent. It can diminish the value of your gun accordingly. You say an add-on leather / other kind of cheek piece looks ugly - wait and see a graft not thought through. I'm with the rest - get yourself a good lace on and enjoy, your gun though so it's up to you. A pic. / two of the gun would be nice. --- John
 
Posts: 288 | Registered: 26 January 2008Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
$20
this will allow you to know if would work or not...

springfield sniper pad
http://www.worldwarsupply.com/...rand-Buttstock-Pouch


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40232 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    How to reshape wood stock having excessive drop at heel and comb?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia