THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
338 Lapua in a CZ 550 magnum?
 Login/Join
 
One of Us
Picture of D99
posted
Talk to me, what do you think?

I know it will work, but what are some negatives?

I am thinking Lawson thumbhole stock, 28 inch # 5 Lilja, magna ported? Black teflon.

What do you guys think?
 
Posts: 4729 | Location: Australia | Registered: 06 February 2005Reply With Quote
One of Us
Picture of D99
posted Hide Post
The biggest advantage I can see is that using a 550 action instead of a custom M700 clone like a McMillan is I save $1200-1500 on the action.
 
Posts: 4729 | Location: Australia | Registered: 06 February 2005Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
I don't see why it won't work. The only glitch might be the 3800 bar limit stamped on the action when the Lapua is loaded to 4700 bar.

The lower limit is a bolt thrust issue on the larger cases but a persnickety gunsmith might make an issue of it nonetheless.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
sounds kinda neat, you'll need a better trigger to fit that kind of design, but it would work

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39923 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of D99
posted Hide Post
Jeff what about just using the single set option already on it.

I had the single set in my CZ 550 375 working perfectly.
 
Posts: 4729 | Location: Australia | Registered: 06 February 2005Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
I figured you would be making a tactical grade weapon.. i find teh cz triggers to generally feel like a single set trigger, that's full of sand Mad

plumber makes a decent replacement.. I wish jewel did, too
jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 39923 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
One of Us
Picture of D99
posted Hide Post
Jeff, keep talking like that and I'll hire you to build it.

Of course you have to wait for me to get home from Italy, and order the parts, and send them to you.
 
Posts: 4729 | Location: Australia | Registered: 06 February 2005Reply With Quote
one of us
posted Hide Post
The action will handle the pressure.

The McMillan A-5 stock will work with the action.

If you specify a "sniper" fill (heavy), it will soak up the recoil pretty well.

The AHR trigger will work just fine. I put one on a CZ in 9.3 x 62 (just sold it to mrxlema). Very crisp and clean.

jeffe, D99, repeat after me, "I WILL NEVER USE A JEWELL TRIGGER IN A TACTICAL RIFLE".

Do a "speed lock" job on the cocking piece and firing pin.

When you have the action trued up, have the smith mill a 20 MOA forward slant on the top. Secure a piece of steel picatinny rail with four 8x40 screws, and you are good to go.

Also, replace the factory bolt with a Holland extended "Tactical" model. Those are the cat's ass in this application.

FWIW, IMO, WTF-O, my $0.02, etc.

LD


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
one of us
Picture of tiggertate
posted Hide Post
Lawndart, I know the action will work too, I just was cautioning that some of the more liability-oriented 'smiths won't do it, just like a few won't mess with trigger jobs.


"Experience" is the only class you take where the exam comes before the lesson.
 
Posts: 11142 | Location: Texas, USA | Registered: 22 September 2003Reply With Quote
One of Us
Picture of D99
posted Hide Post
Lawndart is on to it, I wan't aware anyone but AHR made triggers for it.

" I WILL NEVER USE A JEWELL TRIGGER IN A TACTICAL RIFLE" Why because of the infitecimal number of small parts?

The McMillan A-5 is perfect, and a different bolt handle will do wonders.

Sounds great!

So 650 for the rifle, sell the stock and barrel on ebay recoup some
$600 for the stock
$450 for a 28 inch Lilja fluted 338 barrel 1 in 10 for 300s and 250s,
$400 worth of misc parts bolt, trigger, safety
and $600 to you for the work and the Teflon?
 
Posts: 4729 | Location: Australia | Registered: 06 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia