Go | New | Find | Notify | Tools | Reply |
one of us |
I have a 700 ADL in 7-o8 with the ugly plastic factory stock,shoots good though. I was thinking that an average weight sporter in 358 Win. with a laminate stock would be just about perfect for Bushveld hunting with a 2-7x scope which I already have. Same bolt face too. Would a douglas preturned and chambered barrel installed by a good gunsmith set me back much over 300 bucks? I would have him adjust the trigger and bed the stock at the same time for additional $. Any other things that might pop up with this conversion? [ 02-24-2003, 18:46: Message edited by: KevinNY ] | ||
|
one of us |
you might want to consider a rebore. $100 or so if you send him the barrel only. cliff labounty. very nice guy. you should call and ask him how much if you ship the barreled action. i have seen quite a few short laminate stocks on ebay and such. should be a great gun. enjoy.... do a search for cliff labounty. i dont have his number handy. woofer | |||
|
Moderator |
Kevin, Dave, at IT&D will mount, blue, and true up a 700 to 358, in a douglas, for about $280. jeffe | |||
|
one of us |
Looks like it is very doable in my pricerange, thanks. | |||
|
one of us |
I had Shilen rebarrel a 308 Winchester 70 to 358. It was a stainless barrel. The cost was closer to $500 because they squared the action, rechambered etc. The rifle shoots great though! Bob257 | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia