The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Recommended twist rate for 300 H&H.....?Go | New | Find | Notify | Tools | Reply | |
| Recommended twist rate for 300 H&H.....? | Login/Join |
| one of us |
What is the standard/recommended twist rate for the 300 H&H mag? I will be using 180 & 200gr. bullets such as Nosler Part., Swift A-Frame & Barnes TSX/MRX.....and likely some 165 & 220gr bullets from time to time as well. Thanks, Dave | ||
|
| One of Us |
I would recommend a 1 in 10 twist rate for those bullet weights. | |||
|
One of Us |
Ditto. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| one of us |
The tighter 1 in 10 twist rate would be better for the longer 200 & 220gr bullets....but, how about the shorter 165 & 180grs? I am sure there is a trade off here.....I just want to get and idea of how much of one there is. Thanks, Dave | |||
|
| One of Us |
I always recommend picking the twist rate based on the heaviest bullet you intend to use. The lighter stuff will be fine. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Recommended twist rate for 300 H&H.....?
Visit our on-line store for AR Memorabilia