THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
CZ 550 458 wm to 458 Lott ?
 Login/Join
 
One of Us
posted
Other than having to ream the chamber for the longer round, are there other things that will need to be done to the rifle in oreder to make it a reliable conversion ?
 
Posts: 122 | Location: Villa Rica, GA. | Registered: 27 June 2003Reply With Quote
One of Us
posted Hide Post
Does anyone know if the barrel has to be removed on a CZ 550 in order to ream the chamber out from 458 WM to 458 Lott ?
 
Posts: 122 | Location: Villa Rica, GA. | Registered: 27 June 2003Reply With Quote
One of Us
posted Hide Post
With the amount of lenght in the difference of the two cartridges,it would be advisable to have the barrel set up in a lathe,to be sure of haing everything centered. Sometimes, a hand reamer with an action arbor extension will work,but i wouldn,t advise it on a project like this. One could get an egg shaped chamber real easy.Better being safe than sorry. van
 
Posts: 442 | Location: Idaho | Registered: 16 December 2005Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
Does anyone know if the barrel has to be removed on a CZ 550 in order to ream the chamber out from 458 WM to 458 Lott ?

Have to be? Probably not. Should be? Probably yes.

I've actually had a similar conversion made without barrel removal. Did it work yes. Did I always wonder if I should have had it removed. YES! All others have been barrel removed. Period.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
I talked to the gunsmith that will be doing the work and he will be removing the barrel. Thanks for the info.
 
Posts: 122 | Location: Villa Rica, GA. | Registered: 27 June 2003Reply With Quote
one of us
Picture of Will
posted Hide Post
Jesus! I did the whole friggin deal in less than 30 minutes! And it doesn't take a gunsmith, or barrel removal. Just rent a hand reamer and you can do it yourself. Now they have the reamers that will not cut into the belt which makes it so simpler than when I did it.

It came out more concentric than the 458 WM chambering from the factory!


-------------------------------
Will / Once you've been amongst them, there is no such thing as too much gun.
---------------------------------------
and, God Bless John Wayne. NRA Benefactor, GOA, NAGR
_________________________

"Elephant and Elephant Guns" $99 shipped.
“Hunting Africa's Dangerous Game" $20 shipped.

red.dirt.elephant@gmail.com
_________________________

If anything be of note, let it be he was once an elephant hunter, hoping to wind up where elephant hunters go.

 
Posts: 19389 | Location: Ocala Flats | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia