The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Cleaning up a 270 chamberGo | New | Find | Notify | Tools | Reply | |
| Cleaning up a 270 chamber | Login/Join |
One of Us |
I found a Ruger express in 270 for cheap, what .308 or bigger cartridges could I rebore to and retain the wonderful integral 1/4 rib barrel? .333 Jeffery? .350 Rigby .338-06 (maybe the ackley?) 8.5x63 Reb How much steel do I need outside the bore? | ||
|
| One of Us |
318 is smaller in the shoulder than the 270 is. | |||
|
| One of Us |
Hell a 338 Win would be wonderful. That way you could actually get ammo for it. But the Ruger Africans are available in 338 for half the price tag and no gunsmithing. Just considering. Like most people I think out loud on AR. | |||
|
| One of Us |
350 Rigby would be a real pain for brass except for Bertram shit or turning belts of 375 H&H. 318 and bullets. 333 Jeffery would need some serious reworking of 404 brass. In short you would need to be keen. | |||
|
One of Us |
If; you;ve got enough room on the muzzle why not a 9.3 x 62? I love those older express rifles. | |||
|
One of Us |
Or why not a 35 Whelen, if that won't clean it up do the AI version.... 400 Whelen would be perfect in that rifle!! | |||
|
One of Us |
338/06 would be doable. Send it to the fellow in Oregon for a re-bore. Would make a great rifle. "The liberty enjoyed by the people of these states of worshiping Almighty God agreeably to their conscience, is not only among the choicest of their blessings, but also of their rights." ~George Washington - 1789 | |||
|
| One of Us |
I've seen this done on a Ruger express 30-06. Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | |||
|
| One of Us |
Nice. That would be a neat rifle. | |||
|
Moderator |
express? well, you can put nearly anything on that -- could you measure the muzzle diameter, that we can put it in the reference section? lots of medium and heavy mediums leap to mind.. 375 hh, 416 rem, 404j, 470 accrel, perhaps even 500 accrel... i would likely consider the "easiest" of a 9,3x64 or 375hh ... the ruger 77 action, non-african, can easily take the hh case opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
Anything based on the '06 would work without the necessity of re-headspacing. The exception to this would be if you used a 280 Rem case as your base case. 35 Whelen?? Re-bore and cut neck and throat sections with a combination reamer. Same procedure for 338-06 or 30-06. Dave Manson | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia