THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Has Anybody Converted Ruger Express to 9.3X62 Moved to Med. Bore forum

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Has Anybody Converted Ruger Express to 9.3X62 Moved to Med. Bore forum
 Login/Join
 
One of Us
posted
Moved to Medium Bore Forum


MopaneMike
 
Posts: 1112 | Location: Southern California USA | Registered: 21 December 2006Reply With Quote
One of Us
posted Hide Post
Most reborers require a minimum of .100" per side at the muzzle, some a bit more. .366 +.1 +.1 = .566" so if your muzzle dia is greater than .566" the barrel should be suitable for rebore. You could also shorten a tapered barrel to increase the muzzle diameter a bit if you are too small.
 
Posts: 714 | Location: Milwaukee, Wisconsin | Registered: 09 October 2003Reply With Quote
One of Us
posted Hide Post
Thanks gzig5.. The numbers you furnished will be some help..

Going to move this thread to Medium Bore Forum, maybe more traffic over there will help me out..


MopaneMike
 
Posts: 1112 | Location: Southern California USA | Registered: 21 December 2006Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Has Anybody Converted Ruger Express to 9.3X62 Moved to Med. Bore forum

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia