Has Anybody Converted Ruger Express to 9.3X62 Moved to Med. Bore forum

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/1431075721

24 February 2010, 07:56

MopaneMike

Has Anybody Converted Ruger Express to 9.3X62 Moved to Med. Bore forum

Moved to Medium Bore Forum

MopaneMike

24 February 2010, 18:26

gzig5

Most reborers require a minimum of .100" per side at the muzzle, some a bit more. .366 +.1 +.1 = .566" so if your muzzle dia is greater than .566" the barrel should be suitable for rebore. You could also shorten a tapered barrel to increase the muzzle diameter a bit if you are too small.

24 February 2010, 23:38

MopaneMike

Thanks gzig5.. The numbers you furnished will be some help..

Going to move this thread to Medium Bore Forum, maybe more traffic over there will help me out..

MopaneMike