The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing the little wolf 9.3x62Go | New | Find | Notify | Tools | Reply | |
| the little wolf 9.3x62 | Login/Join |
| One of Us |
Thanks to a couple of fellow AR members this one has found a home. Max Wolf 19"bbl. 6 3/4 lbs. Charles Danner reblued it and Donald Mink did the case coloring on the rings and shroud. Dad fit a set of rings to the mounts and I stole the zeilkein off my 375.         | ||
|
| One of Us |
Love the rifle | |||
|
| new member |
Really nice looking rifle for sure. Have you shot it yet? | |||
|
| One of Us |
Keep in mind, I wear bifocals, prefer a peep, and am a lousy shot. I put a box of Privi through it just to play with it. I thught it would kick like a demon but it was shockingly pleasant to shoot offhand. The best group I got was about 1 1/2" at 50yds. It was hard for me to see the front sight but we just got the scope on it and haven't tried it yet. Too Cold. | |||
|
One of Us |
Beautiful! Nicely done! Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
Moderator |
 VERY NICE opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| one of us |
Everybody has the right to his or her own favorite tastes I guess. This one sure isn't mine, but it appears to be well done. Brent When there is lead in the air, there is hope in my heart -- MWH ~1996 | |||
|
one of us |
That's sweet. As usual just my $.02 Paul K | |||
|
one of us |
DRSS Member | |||
|
| One of Us |
DAle: The last time I saw that gun,it was scattered all over your shop. Iknew it was going to be a beauty.The weather screw up our shooting this week end--maybe next. | |||
|
| one of us |
that rifle is absolutly beautiful!! blaming guns for crime is like blaming silverware for rosie o'donnell being fat | |||
|
one of us |
Beautiful restoration! That's my kind of rifle. Terry -------------------------------------------- Well, other than that Mrs. Lincoln, how was the play? | |||
|
| one of us |
Dale - Absolutely beautiful rifle. I have a similar rifle (8X57) with the same mount arangement. The original scope and rings were lost in a move by the previous owner and I need to have a set of rings fitted. What rings did your dad use as a starting point for fitting? TreeFarmer TreeFarmer NRA Life Member Moderation in the pursuit of decadence is no virture. | |||
|
| one of us |
Gorgeous.  | |||
|
| One of Us |
Gentlemen, I do appreciate all the kind remarks. It boost your courage up to post pictures as long as no one calls your gun dog ugly.  There is a gentleman in Germany that"s a scope dealer and a while back he ran several batches of rings & mounts on Ebay. I won one auction of about a double handful of rings, perhaps 14 or 16. Not a single ring fit any gun we had but I felt I was lucky as there was 3 sets that could be fit to our guns with the wolf being one. | |||
|
| One of Us |
one nice rifle! thanks for the pic!! | |||
|
One of Us |
Very Nice rifle. Just beautiful. But a question about that front base. It looks as if it is slotted into the reciever. At least material have been remooved to make place for the claws, but I really think the wole base is slotted into a dovetail in the reciever, as I have seen that kind of mounting before. I would not recomend that to a M98, so please tell me the picks are lying, and that the base is soldered on, or that I am way off and that making a dovetail like that in the front ring is safe as sun after rain. Bent Fossdal Reiso 5685 Uggdal Norway | |||
|
| One of Us |
Jeez I'm sorry I looked at this.. I had the twin to this Max Wolf, but the stock was too far gone for my taste and the over all condition did not quite rate the expense (on my budget) to go restoration.. Congrats.. She's a keeper MopaneMike | |||
|
One of Us |
ya just got to love this one. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
Hi Bent, You're correct, it's dovetailed for the front base and it's a small ring at that. I have always heard that it isn't safe and shouldn't be done, but I have never, ever heard of a rifle having problems or blowing up because putting the front base in that way. Are you familar with an Abiene mill? We need some info regarding one. Regards, Dale | |||
|
| One of Us |
Sorry for late reply. And sorry for not being able to help you with your mill. Sounds French? My father always thought me, "That the French were supposed to make food, the Germans mashines and the English were supposed to just make Hell. Now, the french are making mashines, the english are making food and the germans are making Hell. Now wonder the world is off!!"  Anyway, I have also never heard bad storys of scopemounts like this, but plenty opinions that it should not be done. I would really like to hear input from others on this issue, maybe we should make a new thread? Bent Fossdal Reiso 5685 Uggdal Norway | |||
|
| One of Us |
Dale, Go to the practical machinest forum and you can get a lot of info on the Abene mill. www.practicalmachinest.com and scroll down to the Deckel and Abene forum. Butch | |||
|
| One of Us |
| |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia