THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Rem 600
 Login/Join
 
kwk
One of Us
posted
I'm getting ready to re-barrel and bed a model 600 rem. Does anyone know if bedding the first inch or so of barrel is better on these or float the entire length. Is there anything else I should know about this action, I've never worked on one before. Thanks
 
Posts: 118 | Location: Price Utah | Registered: 03 January 2006Reply With Quote
Westpac
One of Us
Picture of Westpac
posted Hide Post
Handle it like you would the M700. Won't hurt a thing to let the epoxy flow a little forward of the recoil lug. Just make sure the contact is uniform on both sides and ends evenly.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
 
Posts: 3171 | Location: SLC, Utah | Registered: 23 February 2007Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
quote:
Handle it like you would the M700.

thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
kwk
One of Us
posted Hide Post
Thanks.
 
Posts: 118 | Location: Price Utah | Registered: 03 January 2006Reply With Quote
thismortalcoil
One of Us
posted Hide Post
Had three 600 rebarreled and bedded in the above manner, and all have shot extremely well
 
Posts: 276 | Location: MId-Michigan (back in the States) | Registered: 21 September 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia