The Accurate Reloading Forums
Rem 600

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/1081018601

05 April 2009, 08:37
kwk
Rem 600
I'm getting ready to re-barrel and bed a model 600 rem. Does anyone know if bedding the first inch or so of barrel is better on these or float the entire length. Is there anything else I should know about this action, I've never worked on one before. Thanks
05 April 2009, 09:30
Westpac
Handle it like you would the M700. Won't hurt a thing to let the epoxy flow a little forward of the recoil lug. Just make sure the contact is uniform on both sides and ends evenly.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
05 April 2009, 09:34
vapodog
quote:
Handle it like you would the M700.

thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
05 April 2009, 10:52
kwk
Thanks.
05 April 2009, 20:24
thismortalcoil
Had three 600 rebarreled and bedded in the above manner, and all have shot extremely well