THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Gunsmith...timing in fixing their comebacks, at what point is too long

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Gunsmith...timing in fixing their comebacks, at what point is too long
 Login/Join
 
one of us
Picture of fireball168
posted
Just curious as to what you all think about timing for a gunsmith fixing their own workmanship issues(metal work - not wood).

I've always been of the opinion that comebacks take priority - at least that's the way its always been in my line of work.

I'm getting a story about how busy he is, doesn't know when he's going to get to it, blah - blah - blah. He's had it longer now that the length of time it took him to build it(the first time).

Services in question - "full bore" truing a 700 action, reaming boltway - sleeving the bolt, recutting the threads/lug seats, etc. Things that required tooling beyond what I have immediately available, and perhaps were beyond my skill level(although after looking at what was returned, that's arguable).
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
one of us
Picture of dempsey
posted Hide Post
I wonder what he would think if it was his car that was in the shop under similiar circumstances? I think come backs should be put at the front of the line. That's how things work in the real world. We all know some Smiths operate in a world of their own. I think I'd be looking for a refund at this stage of the game. Been there myself a few times. Finally found a real good Smith, thank goodness.


______________________
Always remember you're
unique, just like everyone else.

 
Posts: 6205 | Location: Cascade, MT | Registered: 12 February 2002Reply With Quote
one of us
posted Hide Post
Returns for defective workmanship or materials always take priority. It's a drop everything else and get it fixed proposition.

Another example of very poor business ethics.
 
Posts: 855 | Location: Belgrade, Montana | Registered: 06 October 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by fritz454:
Returns for defective workmanship or materials always take priority. It's a drop everything else and get it fixed proposition.

Another example of very poor business ethics.


Perhaps the guy has a shop full of returns! Smiler
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
one of us
Picture of fireball168
posted Hide Post
That's exactly what I'm thinking....

Another month and I'll drive down there if I have too...to get it back.
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
one of us
posted Hide Post
quote:
Perhaps the guy has a shop full of returns!


If so I don't think his doors would be open as long as fireball has apparently waited.
 
Posts: 855 | Location: Belgrade, Montana | Registered: 06 October 2000Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
find some else.......if it wasn't done right the first time...it's not likely to be done right the next time....regarding workmanship that is...he's proven his standard to you,,,move on.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of fireball168
posted Hide Post
Received the rifle back - after more than 120 days. NONE of the issues were fixed, no notes or any sort of correspondence was included with the rifle(which was left on my doorstep by FedEx for several days - as they didn't mark signature needed..unbelievable).

I've sent emails, left voice mail messages, even sent a registered letter that was returned "unclaimed".

Guess its time to lawyer up...but I hate to even think of that.
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
One of Us
posted Hide Post
Now is the time to post his name and address.
Good Luck!
 
Posts: 1028 | Location: Mid Michigan | Registered: 08 January 2005Reply With Quote
one of us
posted Hide Post
Dennis Olson (gunsmith) of Plains, Montana did wonderful work for me....with immediate turnaround time...and detailed communication.
 
Posts: 2097 | Location: Gainesville, FL | Registered: 13 October 2004Reply With Quote
one of us
Picture of BlackHawk1
posted Hide Post
In my line of work, that gunsmith would be considered in default on a contract and would be fiducially responsible for reprocurement or any warranty work. Get a lawyer.


BH1

There are no flies on 6.5s!
 
Posts: 707 | Location: Nebraska | Registered: 23 December 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Gunsmith...timing in fixing their comebacks, at what point is too long

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia