The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading D.I.Y. DIY ReceiverGo | New | Find | Notify | Tools | Reply | |
| DIY Receiver | Login/Join |
| One of Us |
Found this while searching Google for "surface grind mauser" Hobbyist makes his own M98 receiver (not the bolt) from scratch after teaching himself. http://jpfo.org/filegen-a-m/boltaction.htm "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | ||
|
| Moderator |
i read this though.. some clever ideas.. but dang, i am glad i don't have to do this opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
I read somewhere that the original Mauser factory had around 660 steps making a M98. "Evil is powerless if the good are unafraid" -- Ronald Reagan "Ignorance of The People gives strength to totalitarians." Want to make just about anything work better? Keep the government as far away from it as possible, then step back and behold the wonderment and goodness. | |||
|
| One of Us |
Mauser had the resources to build 3K or 4k a day. Building receivers is much easier when you have a machine and or fixture designed to make each cut - not to mention highly skilled personel that may have been doing that work for decades. | |||
|
| One of Us |
Remember that a lot of the work was accomplished by forging. When you mass produce, you can invest the money to forge parts. Having read this article many years ago and having completely scratch built two 98 clones when I was in my early 20's (about 35 years ago), I will tell you that I would have much rather started with a forged bolt and receiver. | |||
|
| one of us |
Some years back there was a fellow on the forum who decided to make his own rifle .When finished he proceeded to win his country's championship !!  | |||
|
| one of us |
It would be interesting to know how many steps there were in making this receiver alone. I did find it odd that he went to so much trouble to recreate the "Mauser look" in so many areas, but cut corners in other areas(the recoil lug, for example). And, as I am too lazy to read the whole thing, can anyone tell me how he his receiver accomplishes primary extraction? It looks like he omitted the cam at the rear of the receiver bridge. Jason "You're not hard-core, unless you live hard-core." _______________________ Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt. Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure. -Jason Brown | |||
|
| one of us |
Why go through all the trouble of making a 98 when a 700 or savage is so much simpler. | |||
|
| one of us |
Are there any simple designs for a cartridge based firearm that is possible to make or copy with hand tools in a "reasonable" amount of time? I know you can buy unfinished AR receivers and finish them but I'm thinking something more like copying the parts of a falling block single shot. | |||
|
| one of us |
"A Rifle Anyone Can Build", on Amazon.com... TomP Our country, right or wrong. When right, to be kept right, when wrong to be put right. Carl Schurz (1829 - 1906) | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia