One of Us
| It could be a 45-70 modified to shoot a 50 cal cartridge. new barrel, etc. best shop with care if you do not hand load ammo. NRA Life Benefactor Member, DRSS, DWWC, Whittington Center,Android Reloading Ballistics App at http://www.xplat.net/ |
| | | Posts: 2294 | Location: Republic of Texas | Registered: 25 May 2009 | 
IP
|
|
one of us
| Might be a 50 Alaskan. This is an 1895 with the barrel bored or replaced with a .510 diameter. The case is a 348 Winchester opened up to 50 caliber. It is a larger diameter and heavier bullet that the 45/70. Info: http://leverguns.com/articles/anderson/50_alaskan.htm |
| | |
One of Us
| And it makes the barrel shank paper thin. They usually enlarge the threads some, but still thin. But it works because modern chrome moly steel is very strong. |
| | |
one of us
| quote: Originally posted by dpcd:
And it makes the barrel shank paper thin. They usually enlarge the threads some, but still thin. But it works because modern chrome moly steel is very strong.
You are not giving me a warm fuzzy feeling. I have been shooting a converted cowboy model for, I think 11 years.... no problems yet. |
| | |
One of Us
| Still nice; I like the 450 Marlin.
A converted cowboy to what caliber? 50 AK?
Pressures are low and as I said, chrome moly steel is very strong so no worries. |
| | |
one of us
| I bought the same rifle in .45/70 from Biebs; it has a peep sight on it with the original leaf folded down. Works great. |
| | | Posts: 7583 | Location: Arizona and off grid in CO | Registered: 28 July 2004 |
IP
|
|
One of Us
| quote: Originally posted by AnotherAZWriter:
I bought the same rifle in .45/70 from Biebs; it has a peep sight on it with the original leaf folded down. Works great.
Thanks, the more I thought about it the more it made sense. I understand that after installing the peep sight, I can line it up with the factory sight and be close to where it needs to be. In other words line them all up together. Have you ever heard of that. Nothing replaces the actual shooting. I guess it would be sort of like bore sighting. |
| | | Posts: 430 | Location: New Mexico | Registered: 23 July 2006 |
IP
|
|
One of Us
| i usually rough sight just like you describe. i then tap the buck horn out and put a blank in.
But there are fold down rear sights available.
what did you put on XS or Skinner ?
/ |
| | |
One of Us
| quote: Originally posted by tjroberts:
i usually rough sight just like you describe. i then tap the buck horn out and put a blank in.
But there are fold down rear sights available.
what did you put on XS or Skinner ?
/
I had a friend come by with one of the new clover-leaf designs from Ranger Point Precision. I liked it immediately and so bought one of their peep sights in the clover-leaf. |
| | | Posts: 430 | Location: New Mexico | Registered: 23 July 2006 |
IP
|
|
One of Us
| Marbles makes a good fold down barrel sight that works well with a Marbles folding tang sight. That is the sight combo on my 1886 .45-90. NRA Life Benefactor Member, DRSS, DWWC, Whittington Center,Android Reloading Ballistics App at http://www.xplat.net/ |
| | | Posts: 2294 | Location: Republic of Texas | Registered: 25 May 2009 |
IP
|
|
one of us
| |
| | |
one of us
| Cessna, I think the cartridges in the magazine, and in a reserve pouch in your day pack or kit bag, should give you plenty of protection. Very capable rifle!
There is hope, even when your brain tells you there isn’t.
– John Green, author
|
| | |
One of Us
| I bought a Marlin 1895 in 45-70 in 1976 right after they came out. I had many severe feeding problems with that one,but found out later that this was a common problem on the early models but Marlin worked out the bugs.
Never mistake motion for action.
|
| | |
One of Us
| quote: Originally posted by cessna:
I've received lots of good advise about my new (old) 450 Marlin. So far I've bought new peep sights, a slot blank for the rear sight when removed. One thing that I have noticed on some guide guns is the addition of a cartridge holder on the butt part of the stock. I never considered this, it just seems like something to get in the way. This rifle will spend most of its life in a horse scabbard or in the back seat of a Super-cub. So my feeling about carrying cartridges on the butt is probably not. Am I missing something? I would worry that the cartridges would work themselves out and not be there should I need them.
I'm inclined to agree with your thoughts about carrying cartridges on the butt, though I might use some sort of butt pouch if my rifle was a falling-block single-shot. Maybe, on the on the other hand, if you filled a long, full-length tube magazine, the rearward weight might restore some balance. |
| | | Posts: 5188 | Location: Melbourne, Australia | Registered: 31 March 2009 |
IP
|
|
One of Us
| I always carry spare rounds on the rifle butt on most of my rifles, but especially on my .45/70 Marlin. Getting multiple shots on a herd of pigs is not uncommon for me, and being able to reload quickly, on the move is a plus. Most butt carriers, carry their rounds pretty snugly, particularly fat cased rounds like the .45/70. But that's just me. |
| | | Posts: 3494 | Location: Des Allemands, La. | Registered: 17 February 2007 |
IP
|
|
