One of Us
| You may have better luck posting this in the gunsmithing forum |
| | |
one of us
| Only one I know of the new ones would be the takedown version that is supposedly 'easier' to rebarrel as it has a barrel extension that the barrel threads into. I have never looked at the newer standard ones, but was under the impression those had locking lugs machined integral with the barrel and slip fit into the aluminum receiver. Makes for a difficult rebarrel. Might want to see if there is enough meat on the existing barrel to just have it re-bored and rifled, then chamber for your 458.
Shoot straight, shoot often.
Matt
|
| | |
One of Us
| PM Bill73. He's done quite a bit with extensive levergun mods...not sure who he uses. |
| | | Posts: 20179 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009 | 
IP
|
|
one of us
| Do not get the gears out of sync. You will lose your religion. |
| | | Posts: 8352 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001 |
IP
|
|
