THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
heat traing
 Login/Join
 
Duane Wiebe (CG&R)
One of Us
posted
Just got three actions,one bolt, two cocking pieces and two ejecor housings (Mauser) frm Blanchard Metal Processiong.

Bill came to $894.00! INFLATION! But, as I answerd the guy at the service station complaining about diesel prices..."I jujst hope they keep makng it"

Just a heads up.... Careful about quoting prices.
 
Posts: 3461 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
setters5
One of Us
posted Hide Post
I'm sure they know that they are the only ones doing it these days.
 
Posts: 426 | Location: MN | Registered: 11 May 2011Reply With Quote
Timan
One of Us
Picture of Timan
posted Hide Post
They are the most expensive heat treater there is. Sent a dozen new production bolts 8620. Should have asked for a quote 1st but didn't. $125.00 for the 1st and $50.00 each there after for remaining 11. $675.00 for the batch, with shipping and insurance both ways $775.00

Next,
Just received back a another batch of bolts, another dozen. 8620 for case carburize, same process. This time Flame Metals in Minneapolis $178.00 FOB. with my shipping to FM $213.00 beautiful quality, very light scale. FM will have my business again. Quick turn around too, 16 days total, Darek at FM is the contact there.

Didn't ask about doing old Mausers, Didn't ask if they have a Lic. as not required for bolts.



 
Posts: 1213 | Location: Satterlee Arms 1-605-584-2189 | Registered: 12 November 2005Reply With Quote
Duane Wiebe (CG&R)
One of Us
posted Hide Post
Good information....Kinda difficult to have the guts to change...i.e. do a fair number of extended tangs and always hold my breath to see if they fit back into the inletting....So far...Blanchard is 100%

Of course, bolts are a different ball game.
 
Posts: 3461 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
slivers
One of Us
posted Hide Post
quote:
Originally posted by Timan:
They are the most expensive heat treater there is. Sent a dozen new production bolts 8620. Should have asked for a quote 1st but didn't. $125.00 for the 1st and $50.00 each there after for remaining 11. $675.00 for the batch, with shipping and insurance both ways $775.00

Next,
Just received back a another batch of bolts, another dozen. 8620 for case carburize, same process. This time Flame Metals in Minneapolis $178.00 FOB. with my shipping to FM $213.00 beautiful quality, very light scale. FM will have my business again. Quick turn around too, 16 days total, Darek at FM is the contact there.

Didn't ask about doing old Mausers, Didn't ask if they have a Lic. as not required for bolts.
I think that's what I was charged a year ago when I sent Mauser actions in for re-carburizing, $125 for the first, $50 for every one after that. Sent in a dozen to make it cost effective.


 
Posts: 685 | Location: fly over America, also known as Oklahoma | Registered: 02 June 2013Reply With Quote
Fal Grunt
One of Us
posted Hide Post
If you ever need heat treat that is non FFL, let me know.

The key is to process larger batches. Also, you will recurr multiple charges for multiple hardness/draws.


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1479 | Location: Ohio | Registered: 06 June 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia