THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Go
New
Find
Notify
Tools
Reply
  
Photo of M-21 Brno Bottom Metal
 Login/Join
 
One of Us
posted
Under another heading, Lindy 2 wanted to know what they looked like...and...Ray, spoke too soon, think I'll keep it.

Shown for comparison is my 3MX (XTRA deep for 375, etc).

 
Posts: 3673 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
One of Us
posted Hide Post
Thank you for posting the photo. That Brno does look like it has a lot of finger room in it.
 
Posts: 2059 | Location: Mpls., MN | Registered: 28 June 2014Reply With Quote
One of Us
posted Hide Post
Looks like a VG47 to me. I thought model 21 and 22 Brno's had a shotgun style trigger guard.
 
Posts: 1070 | Registered: 02 April 2008Reply With Quote
One of Us
posted Hide Post
Senior moment! You're right!
 
Posts: 3673 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
one of us
posted Hide Post
 
Posts: 7857 | Registered: 16 August 2000Reply With Quote
one of us
posted Hide Post
Alf is spot on..If I can find one at a reasonable price Im going to try and make the bow and floorplate system into a single unit all welded together as taking the original apart from time to time causes fitting problem particularly in the lower tang of the trigger bow with the small screws, We'll see how that goes?? May have to use a glass bed fit with glass lined screw holes to get passed the wear time over the years..Thingking a lip under the grip cap might work??

I have a picture of my rifle unfinished and a Brno I customs stocke using the original bottom metal, an it loods cool IMO...Go to My New Custom rifle page 2 and take a look of both and give me your opinion of comparison of the two bottom metals profile.

Any suggestions are welcomed.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42297 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of z1r
posted Hide Post
Coincidentally, I found a Brno 21/22 bottom metal unit last night whilst looking for another part. I'd completely forgotten I had it. Now I can replace the unit currently in my 8x57 since the unset trigger pull in the rifle is atrocious.




Aut vincere aut mori
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
one of us
posted Hide Post
You will have to cut the slot out for a single trigger unless you can find a 1943 Brno mod. 21 or 22 that was exactly the same but cut for a single trigger. That's near impossible so Id just modify the one you have, or get a trigger job on the unset trigger..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42297 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Just to clarify.. is this a drop in for the BRNO 21/22 or ZG-47?
 
Posts: 615 | Location: a cold place | Registered: 22 June 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia