THE ACCURATERELOADING.COM CUSTOM RIFLE FORUM

Page 1 2 3 
Go
New
Find
Notify
Tools
Reply
  
Hunting with a custom?
 Login/Join
 
One of Us
posted
We have a few folks complaining about pretty rifles not being used. My recently finished 250-3000 by myself and a lot of work by Jim Kobe. Jim did the stock and throated it for longer bullets. I hunted the Cedar Springs Ranch outside of Mountain Home, Texas for Axis deer this past weekend.

 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
custom?...yes. pretty?...no. here's the m40 clone(in 223) i had built. i'll be using it a little this year



blaming guns for crime is like blaming silverware for rosie o'donnell being fat
 
Posts: 1213 | Location: new braunfels, tx | Registered: 04 December 2001Reply With Quote
one of us
posted Hide Post
also...nice deer and beautiful rifle. a 250-3000 is on my list to be built.


blaming guns for crime is like blaming silverware for rosie o'donnell being fat
 
Posts: 1213 | Location: new braunfels, tx | Registered: 04 December 2001Reply With Quote
One of Us
posted Hide Post
My favorite squirrel and small game rifle:

My favorite plains game rifle:


I've hunted with NOTHING BUT customs for over 40 years now.

Sir, you are apparently a man to ride the river with and I salute you!
Regards, Joe


__________________________
You can lead a human to logic but you can't make him think.
NRA Life since 1976. God bless America!
 
Posts: 2756 | Location: deep South | Registered: 09 December 2008Reply With Quote
One of Us
posted Hide Post
Life is too short to hunt with an ugly gun !

 
Posts: 801 | Location: Pinedale WY USA & Key West FL USA | Registered: 04 February 2011Reply With Quote
One of Us
Picture of Wink
posted Hide Post
I took my Duane Wiebe 404 Jeffery to Tanzania this last July and dragged it through the bush after buffalo.






As for pretty, I guess that depends on your taste. It feels great to have it in your hands when you're tracking buff.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
 
Posts: 7046 | Location: Rambouillet, France | Registered: 25 June 2004Reply With Quote
one of us
Picture of bwanamrm
posted Hide Post
Nice rifle as usual Butch!


I believe in hunting with your firearms not just admiring them and hunt exclusively with customs and semi-customs. Whether Africa or elsewhere!

One of Sterling Davenport's .416 Rigby rifles that has been a "go to" on a number of safaris.




Another of Sterling's rifles in .375 H&H...


On the plains of hesitation lie the bleached bones of ten thousand, who on the dawn of victory lay down their weary heads resting, and there resting, died.

If you can talk with crowds and keep your virtue,
Or walk with Kings - nor lose the common touch...
Yours is the Earth and everything that's in it,
And - which is more - you'll be a Man, my son!
- Rudyard Kipling

Life grows grim without senseless indulgence.
 
Posts: 7572 | Location: Victoria, Texas | Registered: 30 March 2003Reply With Quote
One of Us
posted Hide Post
Guys, those are some really nice rifles....

Mine has a few dings chasing big things but that's what it was made for...plan to do the same with future customs.
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by jjs:
Mine has a few dings chasing big things but that's what it was made for...plan to do the same with future customs.
AMEN, brother!
Regards, Joe


__________________________
You can lead a human to logic but you can't make him think.
NRA Life since 1976. God bless America!
 
Posts: 2756 | Location: deep South | Registered: 09 December 2008Reply With Quote
One of Us
posted Hide Post
They can always be redone after the hunts. The few dings create memories of the hunt.
 
Posts: 2180 | Location: Rancho Cucamonga, Ca. | Registered: 20 February 2008Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by 470drshooter:
They can always be redone after the hunts. The few dings create memories of the hunt.


But then again that would erase those moments from reminding you of them every time you look at the stock! A worn out stock is a tale of a life well lived, of creaked smiles and laughter around a campfire after yet another day in the bush chasing those dagga boys..
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by xile84:
quote:
Originally posted by 470drshooter:
They can always be redone after the hunts. The few dings create memories of the hunt.


But then again that would erase those moments from reminding you of them every time you look at the stock! A worn out stock is a tale of a life well lived, of creaked smiles and sunset laughter around a campfire after yet another day in the bush chasing those dagga boys..
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
One of Us
posted Hide Post
That is what they are built for...









 
Posts: 1581 | Location: Either far north Idaho or Hill Country Texas depending upon the weather | Registered: 26 March 2005Reply With Quote
One of Us
posted Hide Post
Boxhead, nice rifle! I used to own one just like it! Smiler
 
Posts: 318 | Registered: 20 April 2006Reply With Quote
One of Us
posted Hide Post
Before I die I would like to hunt sheep with a Jerry Fisher .270. Now, If I could just talk by friend John L. into loaning me his....
 
Posts: 179 | Location: South of Anchorage | Registered: 21 January 2012Reply With Quote
One of Us
Picture of Wink
posted Hide Post
quote:
Originally posted by G.Hansen:
Wink, I swear that buff and you bear a strong resemblance... not sure, but I think it's the eye's and brow line. Wink

Great buff, by-the-way and your Duane Wiebe rifle- a utilitarian masterpiece, of course.

Thanks for the photos.


It's the "set" in the jaw. I just noticed it myself.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
 
Posts: 7046 | Location: Rambouillet, France | Registered: 25 June 2004Reply With Quote
One of Us
Picture of PD999
posted Hide Post
quote:
Originally posted by Wink:
It's the "set" in the jaw.
Big Grin


----------------------------------------------------------------------------------------------------------------------------------
“A man can never have too much red wine, too many books, or too much ammunition” ― Rudyard Kipling
 
Posts: 1231 | Location: London, UK | Registered: 02 April 2010Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
I get great satisfaction hunting with my rifles that my good mate Vettore made for me;



 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
one of us
Picture of M1Tanker
posted Hide Post
Is there any way to hunt besides with a custom???? My first full custom was completed in January 09 and i have been hunting hard and heavy with it ever since. It is rare that any of my other hunting rifles even get taken to the range anymore let alone taken hunting. I have been able to take some really nice animals with it since then.









Even one of my friends used it to take a really nice whitetail!!!


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
 
Posts: 3156 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
One of Us
Picture of 505ED
posted Hide Post
Great hunts guys!

My last hunt with one of my customs, not the most attractive gun in my rack but--does the job:

375 ultra, by Bill Wiseman


By liled at 2012-09-17

Ed


DRSS Member
 
Posts: 2289 | Location: Texas | Registered: 02 July 2005Reply With Quote
one of us
posted Hide Post
Great hunts and great rifles. Not hunting with your custom rifle is like Natalie Portman asking if you want to have sex and you just saying, "no, I just want to look". It would be a waste.


Larry

"Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson
 
Posts: 3942 | Location: Kansas USA | Registered: 04 February 2002Reply With Quote
One of Us
posted Hide Post
Going from a factory rifle to a custom is like pulling out of Roseanne Barr, and into Audrina Patridge
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by larrys:
Great hunts and great rifles. Not hunting with your custom rifle is like Natalie Portman asking if you want to have sex and you just saying, "no, I just want to look". It would be a waste.


She was hot in Leon! rotflmo
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
One of Us
posted Hide Post
A client's rifle that spent 21 days in S.A. and Mozambique this August...

 
Posts: 131 | Location: London | Registered: 30 May 2012Reply With Quote
One of Us
posted Hide Post
Just want to point out a little detail on thils Rigby rifle.

Many a time I've seen the tang dressed down to eliminate the cocking piece slot extending into the grip. This rifle is done properly

Dressing down that guide slot by very darn much is an almost certain recipe for a jam.

Nice rifle!
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
Picture of PD999
posted Hide Post
quote:
Originally posted by Duane Wiebe:
tang dressed down to eliminate the cocking piece slot extending into the grip

Hi Duane, do have any pictures of how it should and shouldn't look like, as I don't quite understand. Presumably that rifle was built by Paul Roberts. Thanks, Peter


----------------------------------------------------------------------------------------------------------------------------------
“A man can never have too much red wine, too many books, or too much ammunition” ― Rudyard Kipling
 
Posts: 1231 | Location: London, UK | Registered: 02 April 2010Reply With Quote
one of us
Picture of eskimo36
posted Hide Post
I have a couple of custom single shots, a custom Ruger and a Luxus 223, that I hunt with as often as I get the chance. I figure that if I don't, my boys won't hunt with them when I pass them down.


"One shot is usually enough..."
 
Posts: 487 | Location: OK | Registered: 02 February 2003Reply With Quote
One of Us
posted Hide Post
Have you hunted any bear in your area? I have seen a few on the roads around Talihina.
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of eskimo36
posted Hide Post
My folks are from there and I have a friend there that has over a hundred bear pictures from his deer feeders. They are really catching on in SE OK.


"One shot is usually enough..."
 
Posts: 487 | Location: OK | Registered: 02 February 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by PD999:
quote:
Originally posted by Duane Wiebe:
tang dressed down to eliminate the cocking piece slot extending into the grip

Hi Duane, do have any pictures of how it should and shouldn't look like, as I don't quite understand. Presumably that rifle was built by Paul Roberts. Thanks, Peter


I am sure Duane will correct me if I'm wrong, but I think he is talking about blending the rear of the tang down to meet the stock line. What happens is that you end up with a "ramp" of sorts rather than a "gate" that the cocking piece must go through. If the cocking piece is slightly canted when you try to close the bolt, the piece can ride up the "ramp", jamming the bolt something fierce.

See below for a picture of the difference:



Is isn't my picture, I copied it off the web quite a while ago and don't recall whom to credit. Sorry.
 
Posts: 876 | Registered: 09 June 2005Reply With Quote
One of Us
Picture of MJines
posted Hide Post
I just returned from an 18 day hunt with the .404 Jeffery that Duane built me. I carried the gun everyday on some long and hot walks. It was carried in the typical "African" carry mode with the stock on your shoulder holding the barrel. Not surprisingly there was a fair amount of wear on the barrel and the floorplate from that method of carry. Initially I worried about it. But as the hunt went on I realized that the rifle was simply developing character and a look and feel of rifle that is not just a work of art but a working tool too. I shot eight trophy animals with it and all but one were taken with a single shot. We shot a number of bait animals with it too, including three impala females out of a one herd. I actually considered not taking the rifle feeling that it was too nice to mess up hunting, what a travesty it would have been to have left it home.


Mike
 
Posts: 21959 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by M1Tanker:
Is there any way to hunt besides with a custom???? My first full custom was completed in January 09 and i have been hunting hard and heavy with it ever since. It is rare that any of my other hunting rifles even get taken to the range anymore let alone taken hunting. I have been able to take some really nice animals with it since then.









Even one of my friends used it to take a really nice whitetail!!!


I REALLY like the looks of this rifle.
I've seen it posted a few times on here by ya (rightfully proud).
Could you share the specs of this custom build? PM me if you'd prefer.
Thanks!
 
Posts: 2164 | Registered: 13 February 2006Reply With Quote
One of Us
posted Hide Post
Its a ruger isnt it? or based on a ruger anyway
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
one of us
Picture of M1Tanker
posted Hide Post
Thanks for the compliments on my rifle. It has been a real pleasure to own and shoot. I am getting 5/8" 5 shot groups using Barnes TTSX's.

Rather than create another huge post here is a link to the rifle build with all the specs and more pics.

http://forums.accuratereloadin...921066901#5921066901


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
 
Posts: 3156 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
one of us
Picture of M1Tanker
posted Hide Post
quote:
Originally posted by xile84:
Its a ruger isnt it? or based on a ruger anyway


Winchester M70 Classic


William Berger

True courage is being scared to death but saddling up anyway. - John Wayne

The courageous may not live forever, but the timid do not live at all.
 
Posts: 3156 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by M1Tanker:
quote:
Originally posted by xile84:
Its a ruger isnt it? or based on a ruger anyway


Winchester M70 Classic


My bad, should have looked closer. Just saw the shiny action and barrel and it just reminded me of ruger. BEAUTIFUL.
 
Posts: 103 | Registered: 10 December 2011Reply With Quote
one of us
posted Hide Post
Wiebe 450 Rigby












 
Posts: 1361 | Location: Houston, Texas | Registered: 07 February 2003Reply With Quote
One of Us
Picture of PD999
posted Hide Post
quote:
Originally posted by CAS II:
I am sure Duane will correct me if I'm wrong, but I think he is talking about blending the rear of the tang down to meet the stock line.

Thanks CAS II for posting the picture. I still haven't figured it out! Confused
Which one of the two tangs is correctly made? Thanks!


----------------------------------------------------------------------------------------------------------------------------------
“A man can never have too much red wine, too many books, or too much ammunition” ― Rudyard Kipling
 
Posts: 1231 | Location: London, UK | Registered: 02 April 2010Reply With Quote
one of us
Picture of Sevens
posted Hide Post
quote:
Thanks CAS II for posting the picture. I still haven't figured it out!
Which one of the two tangs is correctly made? Thanks!

The one with the bluing still on it is correct (and unmodified). The action in the white has had the tang filed down to end in a point to be flush with the wood.


Nice rifles everyone, BTW!


____________________________

If you died tomorrow, what would you have done today ...

2018 Zimbabwe - Tuskless w/ Nengasha Safaris
2011 Mozambique - Buffalo w/ Mashambanzou Safaris
 
Posts: 2789 | Location: Dallas, TX | Registered: 27 January 2004Reply With Quote
One of Us
posted Hide Post
To my eye all fine guns need a bit of blood, sweat and general love to make them into something more than just a beautifully made sculpture of walnut and steel. I know of a pair of Halland and Hollands that still service most weekends of the pheasant season, most of bluing worn way and the hands of the stock are concave and smooth - just about all the checkering is worn away. But there is three or four generations and 100 years of history behind them. Once they were brand new and built for the first owner.

I have a couple of nice rifles - a Heym SR20, which is a production rifle, but still of very good quality, and a Combination Gun hand built by Hambrusch in 1974 in Ferlach, which I bought at auction for a song three years ago in pretty much unused condition. The latter would cost the equivalent of a decent car to have built today. Do I use them - of course I do, but I look after them. I make sure they are cleaned before they go away. If it is going to be wet they are given a wipe over with oil before going out. And are carried in a slip until they are needed, particularly if it is a wet day - the gunslip also serves as a shooting rest. To my mind most damage is done getting in and out of vehicles, or being bounced around in a vehicle, particularly a land rover or argo cat. With the Hambrusch I did bang the checkering on a rock when shooting my first stag with it. That was the first blemish on - that hurt, but a quick wipe over with some stock oil, you can hardly see it and those missing diamonds have a story to tell.

And if the woodwork ever gets really bashed, its not that difficult to hve it repaired. Probably my favourite gun is a 410 side by side William Jeffery. Its barrels are pitted, the stock has been brocken at some point and repaired, and the engraving on the action is nicely worn. Do I care - no - its lovely.
 
Posts: 987 | Location: Scotland | Registered: 28 February 2011Reply With Quote
  Powered by Social Strata Page 1 2 3  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia