THE ACCURATERELOADING.COM MILITARY FORUM

Go
New
Find
Notify
Tools
Reply
  
US Model of 1917
 Login/Join
 
One of Us
posted
I recently acquired an Winchester US Model of 1917 rifle. I havent found much info on it and was wondering if anyone has any input. The few pictures I've seen on the net seem to look completely different than mine. I'm assuming mine has been sporterized because the stock looks way different and the blueing doesnt look in too bad shape. Are these rifles worth much? Havent shot it yet.
 
Posts: 63 | Location: NM | Registered: 19 July 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Joe 45:
I recently acquired an Winchester US Model of 1917 rifle. I havent found much info on it and was wondering if anyone has any input. The few pictures I've seen on the net seem to look completely different than mine. I'm assuming mine has been sporterized because the stock looks way different and the blueing doesnt look in too bad shape. Are these rifles worth much? Havent shot it yet.


Great rifles...I have two, one Winchester and one Eddystone, both full military, and I have a spare receiver I’m going to sporterize at some point down the road when I get the time.

About the only thing I did to mine was replace the leaf spring style ejector with the coil spring version that is far less prone to breakage. You can get those from Numrich Arms for less than $5.00 and they install in minutes with no modifications to anything, they just drop in.

They ain’t worth all that much, especially if they’ve been sporterized and/or bubba-ized. You can find them for under $500.00 in military trim fairly often... but they are great rifles that you will have a ball shooting and playing with.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
Picture of teflon
posted Hide Post
You have a sporterized Enfield rifle.

I have the same rifle that must have been done years ago, because it has a Herter's scope on it. I knew it was not a collecter when I bought it, but I fell in love with the trigger when I picked it up.

Shoots great and I would have a hard time trading it for anything.

Unless it was an especially good deal ... Cool


The mania for giving the Government power to meddle with the private affairs of cities or citizens is likely to cause endless trouble, through the rivaly of schools and creeds that are anxious to obtain official recognition, and there is great danger that our people will lose our independence of thought and action which is the cause of much of our greatness, and sink into the helplessness of the Frenchman or German who expects his government to feed him when hungry, clothe him when naked, to prescribe when his child may be born and when he may die, and, in fine, to regulate every act of humanity from the cradle to the tomb, including the manner in which he may seek future admission to paradise.
Mark Twain

"ΜΟΛΩΝ ΛΑΒΕ " "Victory or Death!"
 
Posts: 723 | Location: chillin' in the Mountain State | Registered: 10 January 2005Reply With Quote
one of us
Picture of Zeke
posted Hide Post
I have a sporterized Eddystone with the two groove barel. Having a hard time deciding whether to rebarrel to something else or keep it in 30-06. It is in pieces right now while I refinish it.

Here is an excellent article about the M1917

http://www.odcmp.org/503/rifle.pdf

ZM
 
Posts: 655 | Location: Oregon Monsoon Central | Registered: 06 March 2004Reply With Quote
one of us
Picture of TrapperP
posted Hide Post
quote:
Originally posted by Zeke:
I have a sporterized Eddystone with the two groove barel. Having a hard time deciding whether to rebarrel to something else or keep it in 30-06. It is in pieces right now while I refinish it.

Here is an excellent article about the M1917

http://www.odcmp.org/503/rifle.pdf

ZM

Zeke:
In the article you refer to there is a reference to the M1917 Magazine Follower Depressor. I have a 1917 by Winchester that has been roughed out years ago (ears ground, etc.) and I have one of the depressors. How rare are these things? This is the only one I have ever seen and I was wondering if they were ever made for other rifles. I know the '03 and some Brit Enfields had a magazine cutoff device but I know of no other like the 1917 had.
Any info here?


Lord, give me patience 'cuz if you give me strength I'll need bail money!!
'TrapperP'
 
Posts: 3742 | Location: Moving on - Again! | Registered: 25 December 2003Reply With Quote
one of us
Picture of Zeke
posted Hide Post
quote:
Originally posted by TrapperP:
quote:
Originally posted by Zeke:
I have a sporterized Eddystone with the two groove barel. Having a hard time deciding whether to rebarrel to something else or keep it in 30-06. It is in pieces right now while I refinish it.

Here is an excellent article about the M1917

http://www.odcmp.org/503/rifle.pdf

ZM

Zeke:
In the article you refer to there is a reference to the M1917 Magazine Follower Depressor. I have a 1917 by Winchester that has been roughed out years ago (ears ground, etc.) and I have one of the depressors. How rare are these things? This is the only one I have ever seen and I was wondering if they were ever made for other rifles. I know the '03 and some Brit Enfields had a magazine cutoff device but I know of no other like the 1917 had.
Any info here?


Don't have any idea. Ask these guys. They live and breathe old milsurps
http://p102.ezboard.com/fparallaxscurioandrelicfirearmsforumsfrm53
Don't mention sporterizing over there, they go bezerk when sporterizing or Bubba is mentioned.

ZM
 
Posts: 655 | Location: Oregon Monsoon Central | Registered: 06 March 2004Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Zeke:
I have a sporterized Eddystone with the two groove barel. Having a hard time deciding whether to rebarrel to something else or keep it in 30-06. It is in pieces right now while I refinish it.

Here is an excellent article about the M1917

http://www.odcmp.org/503/rifle.pdf

ZM


Just read this article.. Although Zeke posted it in August.. It is an excellent READ... I pulled out my 1917 Enfield and 1903 Springfield just to check out a few things mentioned in the article...

Found out that the Springfield has a Nickel Steel receiver... COOOL

Found out also, my Winchester Made Enfield has a Remington made barrel on it, from Sept 1918...
An InBRED! OH well, it is one accurate SOB anyway... putting some varmint rifle to shame... which ain't bad for a 1918 made 30/06 barrel!

Whether Springfield or Enfield.. I sure like those rifles....

Cheers
seafire
thumb
 
Posts: 16144 | Location: Southern Oregon USA | Registered: 04 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia

 

image linking to 100 Top Hunting Sites