Go | New | Find | Notify | Tools | Reply |
One of Us |
time to show my ignorance....again. I am looking at buying a m-1 garand. when looking at the cmp they list a host of various manufacturers. what should I be looking for ? Did one manufacturer make a better weapon than another company? Some of your wisdom would help. Thanks | ||
|
one of us |
For shooting, Springfield would be my first pick. Winchester my last. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
One of Us |
how do the saginaws, underwoods,ibms rate? | |||
|
one of us |
They made M1 Carbines, not Garands. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
One of Us |
Before I'd submit to a "pick off the stack" rifle from CMP, I'd shop for a Garand at a gun show or from a shop. There's a lot of variation in condition on a Garand. I found a 1943 Springfield (dated from the serial number, found online) which had new wood and looked like it'd never been fired. This from a gun show about a decade ago for $600. These days I see Garands which are pretty beat up, dinged, bruised for the same price. I haven't priced one lately. I'd be inclined to go with a Springfield, but mostly I'd want to see it, pick it out in person. Sorta like getting married. Pick one out, and then you're going to live with it. | |||
|
One of Us |
Pony up the cash for a 'Springfield Special'. I can't wait until mine finally comes. 180 day wait, currently. | |||
|
One of Us |
You will NOT find a $600 Garand at a gunshow any more, unless it is below average. CMP is a great place to get a Garand. Just get the service grade and shoot it. | |||
|
one of us |
I have seen several DCM and CMP Garands. Although this was a few years back, all of them were in good shape and shot good. I would think about getting one form them and some ammo too. DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
One of Us |
Right! International Harvester made some good Garands........ "Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen." | |||
|
One of Us |
I paid $350 and $400 for a couple Denmark Garands 12 years ago at a gun show. They are like so many other rifles that just stay in the safe. Meanwhile the Ruger #1s seem to get shot. | |||
|
One of Us |
I would join a CMP club and get myself a CMP Garand. They are the best Garands on the market, they are checked for dimension. When I went to CMP South I took a throat erosion gage and a muzzle gage. I found a couple of rifles that had very little barrel wear, had a lot of finish. I found a rebuild with a new barrel, and a HRA with a new HRA barrel. All Garands met military specifications. The Winchesters look like they were chewed out of bar stock by angry beavers. Winchesters also command premium prices. I really doubt you will find an affordable all matching Winchester. Same for a IHC. If I were ordering from the CMP I would order a late Springfield Armory or a HRA. These late model rifles are less likely to have seen a lot of use. The late SA's are outstanding examples of fine metal finish and fit. The HRA's are excellent well built rifles. The Korean era rifles all show better machine work and metal finishes than the WWII versions. You can buy an all correct late SA from the CMP for $950.00. They are well worth it. The ones I saw looked un issued, very few dings on the wood or metal. | |||
|
One of Us |
tnekkcc one of us Posted 28 May 2009 21:12 Hide Post I paid $350 and $400 for a couple Denmark Garands 12 years ago at a gun show. They are like so many other rifles that just stay in the safe. Meanwhile the Ruger #1s seem to get shot. I got one of those my own self A Danish refurbished with a VAR barrel what a shooter !. My best one hands down ever is a Springfield 1943 unissued completely matching with a beautiful walnut stock . It was still packed in Cosmoline and came from the Anniston Depot out of Alabama !. A DCM TREASURE that was not a refurbished but an unissued Rifle for $ 165.00 I believe is what it cost back then !. I got another one for $250.00 and the last one for $400.00 The Danish model was $250.00 and the Greek was $ 400.00 , by far the cheapest one is THE GEM ! Never had a round down it either . I'll post a picture of it next time I open the safe . | |||
|
One of Us |
Hate to say this, but for my first ann. my wife bought me a Garand at Woolworth's in Houston for $325.00 16yrs ago. LORD knows I should have bought a butt load more for that price. I have killed an 8 pnt and doe with that gun. It will also be my shooter for this years hunt. Just changed stocks to a new one she also bought me. Set it up for battlefield zero. All I have to do is raise it up. Shot 16 rounds(8 Greek and 8 rds 150grn rnsp) just a little low at 75 yards. what a gun, what a wife ! The things you see when you don't have a gun. NRA Endowment Life Member Proud father of an active duty Submariner... Go NAVY! | |||
|
new member |
Suggest that you visit www.cmp.com and check out the rifles they have for sale. visited the CMP South in Anniston, AL on Friday. They have Springfields with mixed parts, fair barrels and new CMP Cartouched stock for $795.00. The rack grade guns started at $475.00. The CMP forums will give you a good idea of what is going on at the North and South stores. There is a very active discussion about the quality and type of guns available. Old Doug In GA. | |||
|
new member |
| |||
|
One of Us |
Lucky Son of a ..... Mine wouldn't know her ass from her elbow in a gun shop. The guy probably sell her a hunk of junk aka wall hanger at top dollar. lol She was razed around them but could care less. Great score, twice over! Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
One of Us |
I would go with CMP off-the-rack standard. Can't be beat for value. Mike Wilderness is my cathedral, and hunting is my prayer. | |||
|
One of Us |
James, I don't want to rub salt into the wound, but all I did was that it would be cool to have a gum like my Dad used in WWII. The things you see when you don't have a gun. NRA Endowment Life Member Proud father of an active duty Submariner... Go NAVY! | |||
|
one of us |
Are you guys aware that the Korean (South Of course)Government is about to sell a potful of Garands and carbines to the highest American bidder? CMP won't be involved as these are not loaners as the Greek and Danish ones are. Some are said to be unissued in crates. Hope Mitchell's doesn't get the bid. Covey16 Funny,After a rotten war like this,how hard it is to leave- Duncan Grinell-Milne | |||
|
one of us |
Newberry's Downtown also had Garands and carbines at one time.. Funny how times change, I own a Browning Sweet 16 and a Sako Forrester purchased at Sears. One or both rode in the gunrack of my truck when it was parked in my high school parking lot during the fall. They weren't the only ones there and amazeingly no one was killed. Can you imagine an open carry automatic shotgun in a high school parking lot these days? Covey16 Funny,After a rotten war like this,how hard it is to leave- Duncan Grinell-Milne | |||
|
One of Us |
M1 for sale The guy selling it is a solid member. I have been around FalFiles for a few years and have noted the seller as a stand up guy. Of course I know fu**all about the specific rifle. Add a new set of wood (easily obtained) even unto a new Criterion barrel and you'll likely have a fine shooter. I bought a stripped receiver from CMP a few years ago, found a kit at the Houston Gun Collector's Assn Show, bought CMP wood and a Criterion barrel. Fit, headspace, blast-park, oil wood, my M-1 is a beauty and shoots well. From prone, I can tear the center out of an SR-1 reduced target (100 yards) and have scored handily at John C Garand matches with it. I say all that not to brag, make no mistake. I attempt to demonstrate that one can take a used base Garand and make it be what you want. Time is wasting though. I would not di*k around long if I wanted an M-1. My $0.02 and worth near that. My mind works like lightning. One brilliant flash and it's gone. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia