THE ACCURATERELOADING.COM PISTOL SHOOTING FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
ntxt
 Login/Join
 
<G.Hansen>
posted
ntxt
 
Reply With Quote
SR4759
One of Us
posted Hide Post
The strain screw on the main spring needs to be tightened. Good ammo and primers is too easy to make. The fact that it worked in the other revolvers is proof that your Smith just needs a little more spring tension.
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
p dog shooter
one of us
posted Hide Post
quote:
Originally posted by SR4759:
The strain screw on the main spring needs to be tightened. Good ammo and primers is too easy to make. The fact that it worked in the other revolvers is proof that your Smith just needs a little more spring tension.


+1
thats the first thing I try
 
Posts: 20190 | Location: wis | Registered: 21 April 2001Reply With Quote
hivelosity
one of us
Picture of hivelosity
posted Hide Post
I have a couple model 10's MP. One had a lot of dried up grease under the side plate and caused some miss fires. I would check there and clean any junk out of the action and use a light gun oil.
Dave
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia