Got the 10mm setup on the Tanfoglio

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/7611043/m/8171079102

02 July 2014, 08:09

richj

Got the 10mm setup on the Tanfoglio

I love this pistol. The slide MUST be fitted to the frame. Swapped to a 20lb spring. the 14rnd mags are tight, they bulge a bit.

06 July 2014, 04:11

Peter

I assume that this is the 10mm upper conversion for a non 10mm lower? Here is a link to my post way back when I got my EAA Witness Elite Match 10mm:
http://forums.accuratereloadin...401036821#7401036821

Peter.

Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;

06 July 2014, 06:43

richj

Thanks Peter. I never tried Longshot. The load up top is 7.5gr Power Pistol and 180HP Montana Gold.

I also like Silhouette (WAP). You have to be careful with it. 7.5-8 is max in the Delta. 8.5 will bulge cases.

07 July 2014, 04:12

Peter

richj, I would certainly recommend that you try some Longshot if you can get some. Also the 200 grain JHP's! I think I use Power Pistol in my max 9mm and 9x21 loads.
I assume that when they fitted the slide to the frame all the adjustments were made to the slide? How much of a job was it?
Peter.

Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;

09 July 2014, 07:44

richj

I stoned the slide rails to fit the frame. Here's my friends Limited in 10mm
next to mine.