THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    450-400 3 1/4 COMPONENT AVAILABILITY
Go
New
Find
Notify
Tools
Reply
  
450-400 3 1/4 COMPONENT AVAILABILITY
 Login/Join
 
One of Us
posted
Looking at picking up a 450-400 3 1/4 NE double rifle. Have had several in this caliber some years ago but no longer. What are the availability of these components? Brass, bullets and dies? Thanking you in advance.
 
Posts: 2752 | Registered: 10 March 2006Reply With Quote
One of Us
posted Hide Post
I bought a 450/400 3.25” DR in 2019. I bought used RCBS dies from someone on this board. I couldn’t find new dies in the states. Hornady made brass at the time, but quit producing them about a year later. Bullets will be based on the bore diameter.

I checked CH4D website for dies and the site says call for availability. They may have a set. If not, it could be a year plus for dies.

Ken
 
Posts: 72 | Registered: 27 May 2019Reply With Quote
One of Us
Picture of McKay
posted Hide Post
Bertram cases are available at Buffalo Arms. Spendy and poor quality has been my experience with a few calibers from them. Dies will be hard to find and bullets all depends on the bore diameter.


Mac

 
Posts: 1747 | Location: Salt Lake City, UT | Registered: 01 February 2007Reply With Quote
One of Us
posted Hide Post
If you can find dies, you can use 450 3 1/4 brass, which is available right now, to form cases.


DRSS
 
Posts: 1169 | Location: Pamplico, SC USA | Registered: 24 August 2005Reply With Quote
One of Us
Picture of McKay
posted Hide Post
quote:
Originally posted by degoins:
If you can find dies, you can use 450 3 1/4 brass, which is available right now, to form cases.


That’s awesome! Never thought of that.


Mac

 
Posts: 1747 | Location: Salt Lake City, UT | Registered: 01 February 2007Reply With Quote
One of Us
Picture of Huvius
posted Hide Post
My 450-400 3" dies (RCBS #24401) have enough "free bore" to work with 3-1/4" cases.
That's what I've done with mine and it worked in an Alex Henry single.

Here's a set online:

https://www.duckcreeksportingg...ress-2-die-set-rcbs/
 
Posts: 3329 | Location: Colorado U.S.A. | Registered: 24 December 2004Reply With Quote
One of Us
posted Hide Post
Is the 450 x 3 1/4 thin rimmed?
 
Posts: 1188 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
One of Us
Picture of Huvius
posted Hide Post
quote:
Originally posted by kda55:
Is the 450 x 3 1/4 thin rimmed?


Yes - same as the 450-400 3-1/4"
 
Posts: 3329 | Location: Colorado U.S.A. | Registered: 24 December 2004Reply With Quote
One of Us
posted Hide Post
Thank you.
 
Posts: 1188 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    450-400 3 1/4 COMPONENT AVAILABILITY

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia