THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Go
New
Find
Notify
Tools
Reply
  
Heym Jaeger
 Login/Join
 
One of Us
Picture of Bill73
posted
If you are shooting one of the new Heym Jaeger's,could you please tell us what your impressions are?
What are you getting for speed with Hornady ammo?
Thanks.


DRSS
 
Posts: 2283 | Location: MI | Registered: 20 March 2007Reply With Quote
One of Us
Picture of Bill73
posted Hide Post
Another try at this,is there anybody shooting a 450 NE Heym?
What speeds are you getting with Hornady ammo?


DRSS
 
Posts: 2283 | Location: MI | Registered: 20 March 2007Reply With Quote
One of Us
Picture of Clan_Colla
posted Hide Post
I shoot Heym Jaeger #1.
We have only been firing my loads thus far,no factory loads.
The rifle shoots superbly with my loads-
3 weights-480,405 & 325.
We will have some factory Hornady DGX loads in hand shortly to chrono.
 
Posts: 633 | Location: Texas | Registered: 30 December 2012Reply With Quote
One of Us
Picture of Bill73
posted Hide Post
Thanks for the info.


DRSS
 
Posts: 2283 | Location: MI | Registered: 20 March 2007Reply With Quote
One Of Us
Picture of new_guy
posted Hide Post
Hornady developed their loads to do 2150 from a 24" barrel. I would expect at least that from 26" tubes.


www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4026 | Registered: 28 May 2004Reply With Quote
One Of Us
Picture of new_guy
posted Hide Post
This is clan colla's rifle.



www.heymusa.com


HSC Booth # 306
SCI Booth # 3947
 
Posts: 4026 | Registered: 28 May 2004Reply With Quote
One of Us
Picture of Bill73
posted Hide Post
NICE!!!


DRSS
 
Posts: 2283 | Location: MI | Registered: 20 March 2007Reply With Quote
One of Us
Picture of BaxterB
posted Hide Post
I saw one at Reno and just loved it. Was a 450 and that's all I'd need...
 
Posts: 7832 | Registered: 31 January 2005Reply With Quote
one of us
posted Hide Post
Bill 73

If you look carefully you will see that the Jaeger has no cheek piece. I prefer a double rifle stock without a cheek piece, none of mine have one. I have handled the Heym Jaeger's and I really like the way they feel, and the way they look.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
Picture of Nakihunter
posted Hide Post
Wow! That is a nice looking rifle!


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11420 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
Nice rifle.
How long is the for-end timber?
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
One of Us
posted Hide Post
I missed something. What is the Heym Jaeger?
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
One of Us
Picture of ozhunter
posted Hide Post
quote:
Originally posted by RyanB:
I missed something. What is the Heym Jaeger?

The above rifle is the so called "Jaeger".
One of a limited range.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
One of Us
posted Hide Post
Aside from the black receiver and no cheek piece how is it different from a PH and is it more or less expensive?
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
One of Us
posted Hide Post
No ejectors, no cheek piece( is built to customer size), only comes in 450ne 3 1/4, blued receiver. I think that's it.
 
Posts: 373 | Location: British Columbia | Registered: 13 April 2012Reply With Quote
One of Us
Picture of Clan_Colla
posted Hide Post
quote:
Originally posted by Double BC:
Basically a PH with No ejectors, 26" hammer forged barrels no cheek piece( is built to customer size), Actually a straight Stock 14 5/8" only comes in 450 NE 3 1/4, blued receiver. I think that's it.

Intercepting sears, articulated front trigger, cocking indicators, Greener style cross-bolt, rib cut for Doctor Optic mount, regulated with Hornady ammunition

The gun pictured has upgraded wood
 
Posts: 633 | Location: Texas | Registered: 30 December 2012Reply With Quote
One of Us
posted Hide Post
What do they cost?
 
Posts: 956 | Location: PNW | Registered: 27 April 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Clan_Colla:
quote:
Originally posted by Double BC:
Basically a PH with No ejectors, 26" hammer forged barrels no cheek piece( is built to customer size), Actually a straight Stock 14 5/8" only comes in 450 NE 3 1/4, blued receiver. I think that's it.

Intercepting sears, articulated front trigger, cocking indicators, Greener style cross-bolt, rib cut for Doctor Optic mount, regulated with Hornady ammunition

The gun pictured has upgraded wood


Sorry for the delay.

The cost is what we targeted, and we kept the intercepting sears.

Here are the specs:
Cal: 450 NE
Barrels: 26"
LOP: 14&5/8" on this one (to fit on a new order)
Stock: Straight (no cheekpiece)
Extractors (Ejectors not available)
Intercepting Sears: Included
Barrel Length: 26"
Top Rib Cut for Docter/Trijicon (Red Dot) Mount
Cost: $13,000 (as projected)

I copied this from one of new guys posts to be accurate.Handled the gun in Reno along with all the rest. Tony has a good point about the cheek piece the straight stock is svelte. I like the red text...
 
Posts: 373 | Location: British Columbia | Registered: 13 April 2012Reply With Quote
One of Us
Picture of TwoZero
posted Hide Post
To make the gun perfct for me...

Heym could give serious though to getting rid of the cocking indicators, and Greener style cross-bolt.

The cocking indicators fall into the interesting but not nessicary category.

And the Greener style cross-bolt is just not needed on doubles made with modern steels, shooting low pressure nitro-express cartridges.

Two manufacturing and machining complications removed would help to reduce the price of the gun.

But the removal of those two features might require a total re-design which would make things not so cheap after all...

So probably not in my lifetime.

.
 
Posts: 270 | Location: Bay Area, CA | Registered: 19 August 2009Reply With Quote
one of us
posted Hide Post
The Jaeger is built to the same "Rifle" standards as all of Heyms doubles.

The fittine of the action, barrels and regulation is the same as other Heyms.

Two Zero, the cocking indicators let you know that the hammers ARE cocked. On a double with out this feature if something goes wrong, you will not know that the hammer was not cocked until you pull the trigger on that elephant, cape buff or lion at 5 yards...

Also even with modern steel the Greener Cross Bolt adds to the strength of the lockup, and resists the forces of firing that try to open the action.

If you shoot your double a lot, this helps the rifle stay "on the face" quite a bit longer.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
Picture of Clan_Colla
posted Hide Post
quote:
Originally posted by ozhunter:
Nice rifle.
Sorry I missed this earlier, Yes she is quite a beauty, Thank you-
How long is the for-end timber?
about 9.75" along the top
 
Posts: 633 | Location: Texas | Registered: 30 December 2012Reply With Quote
one of us
Picture of MacD37
posted Hide Post
quote:
Originally posted by N E 450 No2:
Two Zero, the cocking indicators let you know that the hammers ARE cocked. On a double with out this feature if something goes wrong, you will not know that the hammer was not cocked until you pull the trigger on that elephant, cape buff or lion at 5 yards...

.


One of the best use for the cocking indicators is, when it is getting dark a simple touch of the indicators will tell if you have the rifle cocked.

The jaeger rifle is a fine rifle, that is aimed at the PH as a customer. The rifle has all the mechanical features needed to make the rifle perfect for the PH, without all the bling that has nothing to do with the operational quality. The features inside the rifle are life savers!


....Mac >>>===(x)===> MacD37, ...and DUGABOY1
DRSS Charter member
"If I die today, I've had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"~ME 1982

Hands of Old Elmer Keith

 
Posts: 14634 | Location: TEXAS | Registered: 08 June 2000Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I will chime in here with Greener's own statement of his crossbolt; it does not come into play until the action is already overstressed with very high pressure loads. And that was with guns made from malleable iron or at best, low carbon steel. With modern alloys, the Greener crossbolt is like wearing suspenders with a belt; totally unnecessary. That is why very few, if any, modern DRs have it; don't need it no matter how much you shoot your rifle.
Get rid of it. I won't even post what I think of the need for cocking indicators. Ok, I will; if it is loaded, it is cocked. Maybe some need loaded chamber indicators instead. Now, if you have a Krieghoff, you have a really big cocking indicator built in.
 
Posts: 17441 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of Dave Bush
posted Hide Post
quote:
Originally posted by TwoZero:
To make the gun perfct for me...

Heym could give serious though to getting rid of the cocking indicators, and Greener style cross-bolt.

The cocking indicators fall into the interesting but not nessicary category.

And the Greener style cross-bolt is just not needed on doubles made with modern steels, shooting low pressure nitro-express cartridges.

Two manufacturing and machining complications removed would help to reduce the price of the gun.

But the removal of those two features might require a total re-design which would make things not so cheap after all...

So probably not in my lifetime.

.


TwoZero:

Please do not take offense but I really laughed when I read your post. What do the rifle manufactures have to do to make us buyers happy? Heym gave us a real "PH" model and a good price and now guys want it to be even cheaper. The Jaeger puts the Heym right in the Krieghoff price range. If this gun with upgraded wood came in at $13,000, it's a great buy on a very solid gun. Just my two cents.

P.S. We Krieghoff owners don't have to worry about cocking indicators or snap caps Smiler


Dave
DRSS
Chapuis 9.3X74
Chapuis "Jungle" .375 FL
Krieghoff 500/.416 NE
Krieghoff 500 NE

"Git as close as y can laddie an then git ten yards closer"

"If the biggest, baddest animals on the planet are on the menu, and you'd rather pay a taxidermist than a mortician, consider the 500 NE as the last word in life insurance." Hornady Handbook of Cartridge Reloading (8th Edition).
 
Posts: 3728 | Location: Midwest | Registered: 26 November 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia