THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Go
New
Find
Notify
Tools
Reply
  
450 3 1/4
 Login/Join
 
one of us
posted
I just received a 100 lot of brass from down under and am wanting to start trimming cases for reloading. Somehow I misplaced the loading data for my Heym 88B Safari rifle. If someone would be gracious enough to supply me what the case length, overall cartridge length, and any favorite/pet loads for their 450 3 1/4 double I will be eternally grateful. Thanks, Mike


FourTails
 
Posts: 920 | Location: USA | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
quote:
Heym 88B Safari rifle



I have got the same beautiful DR...

Same caliber...would be interested in answers too.
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
One of Us
posted Hide Post
According to the A-square manual...for the 450 N.E. 3 1/4"...trim to length 3.240", OAL 3.950".

I do not have a 450 3 1/4" but I do have a 470NE it likes H4831sc...A-square list loads for the 450 3 1/4" for H4831 95grains to 101grains with A-square cases, CCI-250 primers...they also list IMR 4350 and RL19 as powders...if you want more info. from the A-square manual let me know...or get one
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
one of us
posted Hide Post
Four Tails:
480gr. Woodleigh Soft points and 95grs. of IMR 4831
480 gr. Woodleigh FMJs and 86 grs. of RL15 work best in my gun.
Mine is a modern gun, so, use the usual precautions.
Peter.


Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
 
Posts: 10515 | Location: Jacksonville, Florida | Registered: 09 January 2004Reply With Quote
one of us
posted Hide Post
j.j.s./Peter: Thanks for the help. Where is the best/cheapest place to acquire the A-square Manual? Mike


FourTails
 
Posts: 920 | Location: USA | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by FourTails:
j.j.s./Peter: Thanks for the help. Where is the best/cheapest place to acquire the A-square Manual? Mike



i don´t know but share your reloading data with me... Wink
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
One of Us
posted Hide Post
Not sure about the cheapest...but you may wish to try:

www.midwayuse.com or www.cabelas.com
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
should have been

www.midwayusa.com
 
Posts: 1999 | Location: Memphis, TN | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
By the way... Is there any experiance with the 500gr Trophy bonded sledge Hammer solids in 450 N.. 3 1/4??? And with trophy bonded sps?
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
one of us
posted Hide Post
Cabela's had it for $34.95 and should be here about the 17th. Thanks again for the lead. Good Shooting! Mike


FourTails
 
Posts: 920 | Location: USA | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
Schorsch:

The Trophy Bonded Bear Claw has a full caliber homogenous shank and is, therefore, a mono-metal bullet, which is not a good idea in a DR. I suggest Woodleigh softs and solids.
------------------------------------------------
"Serious rifles have two barrels, everything else just burns gunpowder."
 
Posts: 1742 | Location: Texas | Registered: 10 January 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by 400 Nitro Express:
Schorsch:

The Trophy Bonded Bear Claw has a full caliber homogenous shank and is, therefore, a mono-metal bullet, which is not a good idea in a DR. I suggest Woodleigh softs and solids.
------------------------------------------------
"Serious rifles have two barrels, everything else just burns gunpowder."



Frowner

I love the Bear claws...

I think i will ask Heym which bullet they prefer for regulating DRs...
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
one of us
posted Hide Post
I too like Trophy Binded Bearclaws. They are one of my favorite bullets in the 308. The last 2 elk I killed with my 300 Win Mzag were with 200 gr TB. I like the Federal facto0ry 375 load with the 250 gr TB for black bear. I have not shot one with it yet but I have used it on two hunts.
I shot 2 buff in 2004 [450 No2] and recovered a 480 Woodleigh Soft, and 2 Swift 500 gr A Frames.
Both performed perfectly.
i also recovered some solids shot into the buff and the 3 elephant I killed. They too performed perefectly.
In the Nitro Expresses the Woodleigh Softs and Solids are perfect.


DOUBLE RIFLE SHOOTERS SOCIETY
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by N E 450 No2:
I too like Trophy Binded Bearclaws. They are one of my favorite bullets in the 308. The last 2 elk I killed with my 300 Win Mzag were with 200 gr TB. I like the Federal facto0ry 375 load with the 250 gr TB for black bear. I have not shot one with it yet but I have used it on two hunts.
I shot 2 buff in 2004 [450 No2] and recovered a 480 Woodleigh Soft, and 2 Swift 500 gr A Frames.
Both performed perfectly.
i also recovered some solids shot into the buff and the 3 elephant I killed. They too performed perefectly.
In the Nitro Expresses the Woodleigh Softs and Solids are perfect.



Sounds good...

And whats about the Trophy Bonded Sledge Hammer Solids?

I want to shoot flt nosed solids...
 
Posts: 276 | Registered: 28 January 2005Reply With Quote
one of us
posted Hide Post
People, My A-Square Reloading Manual arrived and it seems to show everything that will get me started. I appreciate everyones's help. Good shooting! Mike


FourTails
 
Posts: 920 | Location: USA | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia