THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Bailey Bradshaw Double at DSC
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Bailey Bradshaw Double at DSC
 Login/Join
 
One of Us
Picture of subsailor74
posted
First of all, it was great meeting many of you in person in Dallas. I thought it was a great show. I also thought I would share photos of my Bailey Bradshaw rifle that is nearing completion - Bailey had my rifle at the show for those of you who could not attend. Bailey assures me my rifle will be delivered by the end of January 2013. As you can see from the photos, the rifle is still "in the white". When completed, it will have a skeleton grip, skeleton butt, metal other than the barrels will be color case hardened, and Bailey's double "B" logo will be inlayed in gold on each side of the receiver (small- about the size of a dime - a little gold goes a long way). Bailey has made several design changes since I ordered the rifle 2 years ago, and I like all of them. In one of the photos you can see the cocking indicators at the rear of the breech block. Once I send him ammo for regulation, he says he will finish it quickly. Overall, I was very pleased with the rifle and can't wait to see it completed.



 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
posted Hide Post
Yes I think it will be a great rifle when finished and yes I was the guy holding it so you could take one of the pictures.
Bill


Member DSC,DRSS,NRA,TSRA
A man who carries a cat by the tail learns something he can learn in no other way.
-Mark Twain
There ought to be one day - just one – when there is open season on Congressmen.
~Will Rogers~
 
Posts: 1132 | Location: Fort Worth, Texas | Registered: 09 May 2006Reply With Quote
One of Us
posted Hide Post
Very nice...I'm glad for you. I guess your build has put mine on the back burner again, 2+ years after it was ordered.
 
Posts: 20173 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
Picture of DoubleDon
posted Hide Post
quote:
Originally posted by Biebs:
Very nice...I'm glad for you. I guess your build has put mine on the back burner again, 2+ years after it was ordered.


Biebs, Bailey is just trying to teach you how to delay gratification. Big Grin


Deo Vindice,

Don

Sons of Confederate Veterans Black Horse Camp #780
 
Posts: 1709 | Location: Virginia | Registered: 01 February 2009Reply With Quote
One of Us
posted Hide Post
Doing a great job of it :-(
 
Posts: 20173 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
posted Hide Post
Good things come to those who wait?

That is a nice gun indeed. I guess you can take solace in the fact that
1. you have one in the works
2. you can see and know that the gun will be beautiful and well made.

I need to go out an buy a lottery ticket.

PS You know the first one always has bugs. So yours should all of the kinks worked out. He's getting the Beta.


NRA Benefactor
TSRA Life
DRSS
Brno ZP-149 45-120 NE

 
Posts: 937 | Location: Corpus Christi, Texas | Registered: 09 June 2009Reply With Quote
One of Us
posted Hide Post
Looks nice. I've been waiting 18 months, hopefully soon.
 
Posts: 1981 | Location: South Dakota | Registered: 22 August 2004Reply With Quote
One of Us
posted Hide Post
Biebs,

I know your rifle is late, and I'm certainly not proud of it. I could give you a long list of reasons, but I know they don't matter. Bottom line is I need to deliver it and I'm busting my ass to do just that.

I'm looking into a major equipment purchase along with outsourcing some steps of the rough machining to speed up my build time. I am also going to be hiring a machinist within the year if my plan goes as I hope.

I should have started with more capital and wish I could have hit the gas pedal much sooner. The design changes I have made not only make the rifles better, but more streamlined to build as well. Now that the changes are made and implemented, I am doing everything I can to get the ball rolling and get my order wait time down to less than one year. There has been A LOT of prototyping done but the bugs have been worked out and the gas pedal is on the floor.

I know many of you who have rifles on order have been waiting far too long. I appreciate how patient most have been and will not disappoint you when the rifle is delivered.

All that being said, I walked into the shop this morning to find the power acting funny. Measured the input voltage from the meter at 181 volts. As it turns out, I have a burried cable burned in half. Somewhere in the 150 foot run to the transformer pole, there is a repair to be made. Shovel and pick in hand, I get to dig the cables up, find and repair the open tomorrow and turn my shop back on.......


Bailey Bradshaw

www.bradshawgunandrifle.com



I'm in the gun buildin bidness, and cousin....bidness is a boomin
 
Posts: 568 | Location: Diana, TX | Registered: 10 January 2007Reply With Quote
One of Us
Picture of FAST996
posted Hide Post
Really stunning work. My hats off to the very few riflesmiths(under 5?) in the U.S. that design and build a action and rifle from scratch. That under capitalised problem seems to be universal for those "one man" shops that follow their dreams.


"A long life, and the good sense to live it." ...Quintis Arrius

375H&H,404J,416DAK,458AFR,416RIG,450RIG,505GIB

Avatar: Gregory Peck & Susan Hayward in Africa

NRA member

 
Posts: 858 | Registered: 27 October 2007Reply With Quote
One of Us
posted Hide Post
Nice looking rifle. I bet it shoots like a dream when he gets done with it. Congratulations.
 
Posts: 4214 | Location: Southern Colorado | Registered: 09 October 2011Reply With Quote
One of Us
Picture of Venture South
posted Hide Post
Bailey
Great rifle. Have any been exported to South Africa?
Ian


Specialist Outfitters and Big Game Hounds


An appeaser is one who feeds a crocodile, hoping it will eat him last. - Winston Churchill
 
Posts: 794 | Location: Namibia Caprivi Strip | Registered: 13 November 2012Reply With Quote
One of Us
posted Hide Post
Haven't exported to S.Africa yet. So far Canada, England and Spain.


Bailey Bradshaw

www.bradshawgunandrifle.com



I'm in the gun buildin bidness, and cousin....bidness is a boomin
 
Posts: 568 | Location: Diana, TX | Registered: 10 January 2007Reply With Quote
One of Us
posted Hide Post
if you get your south african permits together and can come to usa to pick up the rifle it's a walk through at customes. we just sent a rifle home to rsa during dsc.
 
Posts: 3818 | Location: kenya, tanzania,RSA,Uganda or Ethophia depending on day of the week | Registered: 27 May 2009Reply With Quote
One of Us
posted Hide Post
i have at least 4 guys thinking of ordering from bailey but there waiting to see and shot mine when it's finished
 
Posts: 3818 | Location: kenya, tanzania,RSA,Uganda or Ethophia depending on day of the week | Registered: 27 May 2009Reply With Quote
One of Us
Picture of Venture South
posted Hide Post
Thanks for the update.
How is case extraction time on this type of action. With a 500 NE would it be as fast as a conventional extractor double?

Is the rifle designed to be a hard working PH rifle or is it a novelty with some practical application?


Specialist Outfitters and Big Game Hounds


An appeaser is one who feeds a crocodile, hoping it will eat him last. - Winston Churchill
 
Posts: 794 | Location: Namibia Caprivi Strip | Registered: 13 November 2012Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ddrhook:
i have at least 4 guys thinking of ordering from bailey but there waiting to see and shot mine when it's finished


Please give us a report on how it handles and shoots.


Cheers
Jack
 
Posts: 80 | Location: Queensland. Oz | Registered: 08 September 2011Reply With Quote
One of Us
posted Hide Post
i have been able to shoot a lot of baileys rifle over the last couple yrs. I had the good fortune to like close when we became friend. all of them i have shot shoot well. the action once you get used to it is great. accuracy is really really good. there is an article in expedition africa online magazine about them.
 
Posts: 3818 | Location: kenya, tanzania,RSA,Uganda or Ethophia depending on day of the week | Registered: 27 May 2009Reply With Quote
One of Us
Picture of Aaron Little
posted Hide Post
Over the last year Bailey and I have have made a handful of changes to his actions and we feel they are far superior compared to what it was at the beginning. One of the best changes was in his extractor system. His new design has two phases, the first primary phase uses the direct force of the lever to pull the case out of the chamber about .100". Usually if you have a stuck case it will free up before the first phase ends. In fact the first phase is so powerful I have no doubts it would pull the rim right off the case, mechanically it is that strong. The second phase is there to act in a way that will accelerate movement. Depending on manipulation it will extract or eject. Move the lever at a normal pace and it extracts to so can pull the cases out. In the event of needing to rush a reload you pull the lever down with authority and it will eject; which when adrenaline is going your probably going to do anyways. It might be necessary to tip the butt down so the cases fall out if you can't bump it down hard enough. We felt this was the most reliable system in the event of sticky cases.

Another change is the trigger system. Our new design allows us to obtain lighter pulls, the design is safer in the event of doubling, and its easier for us to tune.


http://www.facebook.com/profil...p?id=100001646464847

A.M. Little Bespoke Gunmakers LLC
682-554-0044
Michael08TDK@yahoo.com
 
Posts: 1026 | Location: Mineola, TX | Registered: 15 October 2010Reply With Quote
One of Us
posted Hide Post
Hey subsailor, any update on your Bradshaw double?
 
Posts: 210 | Location: Zimbabwe | Registered: 16 September 2010Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
quote:
Originally posted by Matabele:
Hey subsailor, any update on your Bradshaw double?

Bailey sent me a regulation target last week that showed 2 shots from my rifle at 50 yards that measured the width of the barrels. He said it would be completed by the end of the month. I am trying not to bug him. (but that is difficult for me!!)
 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
Picture of D R Hunter
posted Hide Post
I wish you GREAT SERVICE from your B. Bradshaw D/R
and I fully expect that's just what you'll get! I'm a huge
fan of this design!!!!!!
clap salute dancing salute clap


D/R Hunter

Correct bullet placement, combined with the required depth of bullet penetration, results in an anchored animal...


 
Posts: 997 | Location: Florida - A Little North of Tampa  | Registered: 07 August 2012Reply With Quote
One of Us
posted Hide Post
Are there any owners of these rifles that can give feedback on the rifle after firing a number of rounds through them?? Dont seem to have any reports on how they are going. l know there are not a large number of them around.
Would like to have one of these rifles sent down under.


Cheers
Jack
 
Posts: 80 | Location: Queensland. Oz | Registered: 08 September 2011Reply With Quote
One of Us
posted Hide Post
Sounds like perfect regulation! I'd be champing at the bit right about now, hang in there can't be too much longer now.
 
Posts: 210 | Location: Zimbabwe | Registered: 16 September 2010Reply With Quote
One of Us
posted Hide Post
It will be finished this week. I'm engraving it now and will case color it by mid week.


Bailey Bradshaw

www.bradshawgunandrifle.com



I'm in the gun buildin bidness, and cousin....bidness is a boomin
 
Posts: 568 | Location: Diana, TX | Registered: 10 January 2007Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
quote:
Originally posted by Bailey Bradshaw:
It will be finished this week. I'm engraving it now and will case color it by mid week.


SWEET!
 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
posted Hide Post
Now me?
 
Posts: 1981 | Location: South Dakota | Registered: 22 August 2004Reply With Quote
One of Us
Picture of Gundog 64
posted Hide Post
quote:
Originally posted by Biebs:
Very nice...I'm glad for you. I guess your build has put mine on the back burner again, 2+ years after it was ordered.

Been waiting on a refund for 17 month's now.
 
Posts: 818 | Registered: 26 November 2009Reply With Quote
One of Us
posted Hide Post
And your refund is coming. Frankly I've been broke for about a year now scrambling to pay bills. I explained that to you, and since all I owe you is the deposit ( which is not normally refundable and is clearly stated on my website and you were/are aware of this, yet I agreed to refund it , so much for being a nice guy)......but I'm sending the brass and dies back with the check as I stated last time we exchanged emails. So your order was ALL lost time and I'm not asking to keep anything for my time. I'll send it as soon as I CAN, which should be SOON. The last couple of plans to raise the money fell through and were based on potential sales that didn't happen, now money is coming from orders. I'll be in touch.


Bailey Bradshaw

www.bradshawgunandrifle.com



I'm in the gun buildin bidness, and cousin....bidness is a boomin
 
Posts: 568 | Location: Diana, TX | Registered: 10 January 2007Reply With Quote
One of Us
posted Hide Post
I would think that if any gunbuilder is going to expect a person to put down a nonrefundable deposit the fair exchange would be a definite time when the metalwork SHALL be completed.

The way that "agreement" is worded now it is rather remarkable that anyone would agree to it.
 
Posts: 283 | Registered: 02 November 2012Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
My rifle is almost ready for delivery. Bailey sent me this photo today. The engaving and color case hardening are complete. All that is left is final assembly, final test and ship!
 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Beautiful!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
Picture of D R Hunter
posted Hide Post
May thousands find their way to hunter's hands... salute


D/R Hunter

Correct bullet placement, combined with the required depth of bullet penetration, results in an anchored animal...


 
Posts: 997 | Location: Florida - A Little North of Tampa  | Registered: 07 August 2012Reply With Quote
One of Us
posted Hide Post
Looking good! Cant wait to see the complete rifle.
 
Posts: 210 | Location: Zimbabwe | Registered: 16 September 2010Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
I spoke with Bailey last week, and he is completing the final touches on my rifle. He sent me these photos to share. I think this one will have been worth the wait!



 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
posted Hide Post
Bailey, Sub

Congratulations, beautiful.
 
Posts: 373 | Location: British Columbia | Registered: 13 April 2012Reply With Quote
One of Us
posted Hide Post
Great looking rifle! Will be looking forward to a range report.
 
Posts: 618 | Location: North Louisiana | Registered: 01 February 2011Reply With Quote
One of Us
posted Hide Post
Any range reports on this one yet? Those of us still in the que are anxiously waiting....

Beautiful rifle....
 
Posts: 150 | Location: San Antonio, TX | Registered: 30 October 2006Reply With Quote
One of Us
posted Hide Post
The Admiral gets his today!
 
Posts: 20173 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
Picture of subsailor74
posted Hide Post
quote:
Originally posted by Biebs:
The Admiral gets his today!


Once I have the rifle in hand, I will start a new thread with photos, range results etc. Only a few hours now!
 
Posts: 1594 | Location: Virginia | Registered: 29 September 2011Reply With Quote
One of Us
posted Hide Post
Great!
 
Posts: 20173 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Bailey Bradshaw Double at DSC

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia