THE ACCURATERELOADING.COM DOUBLE RIFLES FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Any suggestions for a cartridge belt ?
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Any suggestions for a cartridge belt ?
 Login/Join
 
One of Us
posted
Guys, I am looking for a cartridge belt to carry for buff and ele hunt. Any suggestions out there and, if so, why should I choose that specific belt ?

Morten


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of MJines
posted Hide Post
The ones made by Dick Murray are very nice. So are the ones sold by Chris Sells but I am not sure if they are available off the shelf, Dick's are.


Mike
 
Posts: 21825 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
+1.

I have several.they are great!
 
Posts: 12123 | Location: Orlando, FL | Registered: 26 January 2006Reply With Quote
One of Us
posted Hide Post
Thanks Mike and Larry. Open or closed loops ?


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
posted Hide Post
Look at "culling-belt .375"

http://afrikanskakompaniet.nya-ebutik.se/



 
Posts: 3974 | Location: Vell, I yust dont know.. | Registered: 27 March 2005Reply With Quote
One of Us
Picture of MJines
posted Hide Post
I prefer the closed loops. Sometimes over time open loops will expand and fail to hold the cartridges securely. Others like the open loops since they say they can push the cartridges up from the bottom. The good news with Dick Murray's holders is that the loops are elastic, representing the best of both worlds.


Mike
 
Posts: 21825 | Registered: 03 January 2006Reply With Quote
One of Us
posted Hide Post
Are yiou bringing more than one rifle, if so what calibers?
 
Posts: 1630 | Location: Vermont | Registered: 27 March 2006Reply With Quote
One of Us
Picture of cal pappas
posted Hide Post
Can't go wrong with anything from Trader Keith.
Cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
 
Posts: 7281 | Location: Willow, Alaska | Registered: 29 June 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Zephyr:
Are yiou bringing more than one rifle, if so what calibers?


If I bring two there will be 375 HH and 450 NE.


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
I like the belts and or slides from Dick Murray as well. He lives just down the road from my house and I've dropped in a couple of times. His products are first rate and if he doesn't have what you want in stock, he'll make it for you.

Personally, I like the open loops. I like the ability to push the cartridges up from the bottom and I never have to worry about the (closed) loops getting too loose to hold the rounds as they stretch. When that happens, with the open loops, just push the rounds further down into the loops. I've had too many rounds fall out of the closed loop type.
 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
One of Us
Picture of nitro450exp
posted Hide Post
Trader Kieth's culling belt.
You can't go wrong.

Nitro


"Man is a predator or at least those of us that kill and eat our own meat are. The rest are scavengers, eating what others kill for them." Hugh Randall
DRSS, BASA
470 Krieghoff, 45-70 inserts, 12 ga paradox, 20 ga DR Simson/Schimmel, 12 ga DR O/U Famars, 12 ga DR SXS Greener
 
Posts: 813 | Location: USA / RSA | Registered: 14 January 2008Reply With Quote
One of Us
posted Hide Post
Morton,
Dick Murray made my belts., one for each calibre , and they are the best I have seen. I,like Todd, much
Prefer the open loops for easier/ quicker reloads.

Cheers

Nick
 
Posts: 665 | Location: EU | Registered: 05 September 2010Reply With Quote
One of Us
posted Hide Post
I've got both, the Trader Keith and one of the Murray belts. I think I prefer the canvas one from Trader Keith over the leather. Nothing wrong with the Murray, just preference.
 
Posts: 4214 | Location: Southern Colorado | Registered: 09 October 2011Reply With Quote
One of Us
posted Hide Post
have a look at this guys work here in Australia I just got one done and couldn't be happier with the quality www.joshualeather.com tu2
 
Posts: 896 | Location: Langwarrin,Australia | Registered: 06 September 2007Reply With Quote
One of Us
Picture of twoseventy
posted Hide Post
Texas Hunt Co. Works well and will last.

Tom


...I say that hunters go into Paradise when they die, and live in this world more joyfully than any other men.
-Edward, duke of York

". . . when a man has shot an elephant his life is full." ~John Alfred Jordan

"The budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed lest Rome become bankrupt. People must again learn to work, instead of living on public assistance." Cicero - 55 BC

"The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." - Ayn Rand

Cogito ergo venor- KPete

“It is not from the benevolence of the butcher, the brewer, or the baker, that we expect our dinner, but from their regard to their own self-interest. We address ourselves, not to their humanity but to their self-love, and never talk to them of our own necessities but of their advantages.”
― Adam Smith - “Wealth of Nations”
 
Posts: 989 | Location: Oregon | Registered: 12 June 2009Reply With Quote
One of Us
Picture of cal pappas
posted Hide Post
I don't always agree with Todd but in this case open loops are the only way to go. Not only can the cartridges be extracted more easily but both a pull and a push, but the closed loops pick up and hold water, dirt, and mole shit.
So, Todd, old mate, I'm with you on this one. However, I will leave you to your Blasers and admiration of Shootaway.
Cheers, gents.
Cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
 
Posts: 7281 | Location: Willow, Alaska | Registered: 29 June 2009Reply With Quote
One of Us
posted Hide Post
I have taken a look on Todd's video again and the report from Nickh and both use the Murray belt with open loops. Looks nice and I agree and will probably follow your recommendations.

Sorry Mike... no 26 inch barrel and no closed loops Wink I leave a cigar or two for you in camp for compensation Smiler


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by twoseventy:
Texas Hunt Co. Works well and will last.

Tom


Tom,
du you have an internett address to Texas Hunt Co ? I understand they some other nice products as well I would like to have look at.

Morten


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
quote:
Originally posted by cal pappas:
I don't always agree with Todd but in this case open loops are the only way to go. Not only can the cartridges be extracted more easily but both a pull and a push, but the closed loops pick up and hold water, dirt, and mole shit.
So, Todd, old mate, I'm with you on this one. However, I will leave you to your Blasers and admiration of Shootaway.
Cheers, gents.
Cal


Cal, somehow I think you got the wrong message from that Blaser/shootaway comic thread. In reality, I'm not sure which of the two I DESPISE more!

Just to be clear on the matter ... One is a totally useless Piece of S&*T. The other is an absolutely ugly rifle! barf

Other than that Cal, I really can't remember us disagreeing on anything except the use of proper flat nosed solids in double rifles. beer
 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
One of Us
posted Hide Post
I brought a double and a bolt gun on my hunt as well. I purchased a 2" belt from Murray and four 10 round belt slides from him. 2 leather for my double and two 2 elastic for my bolt gun. 10 solids and 10 softs in each for their respective rifles. When I grabbed a different rifle I slid off and on new slides..

 
Posts: 1630 | Location: Vermont | Registered: 27 March 2006Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
quote:
Originally posted by The Norwegian:
I have taken a look on Todd's video again and the report from Nickh and both use the Murray belt with open loops. Looks nice and I agree and will probably follow your recommendations.

Sorry Mike... no 26 inch barrel and no closed loops Wink I leave a cigar or two for you in camp for compensation Smiler


Hey Morten, you're getting it now. We just need to get you off of those beavertail fore-ends and love of Blasers and you'll be all set! barf on both of those!

Cool
 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
One of Us
Picture of McKay
posted Hide Post
quote:
Originally posted by twoseventy:
Texas Hunt Co. Works well and will last.

Tom


Agreed. I have tried all the others except Chris Sells and always come back to the Belt Feed.


Mac

 
Posts: 1747 | Location: Salt Lake City, UT | Registered: 01 February 2007Reply With Quote
One of Us
posted Hide Post
quote:
Personally, I like the open loops. I like the ability to push the cartridges up from the bottom and I never have to worry about the (closed) loops getting too loose to hold the rounds as they stretch. When that happens, with the open loops, just push the rounds further down into the loops. I've had too many rounds fall out of the closed loop type.


There is a lot to be said for open loops no one likes mole shit on there solids...
To cure stretched leather loops I am under the impression that a soaking in water or alcohol will be the cure, but this is a question better asked of Dick Murray.
 
Posts: 1630 | Location: Vermont | Registered: 27 March 2006Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
quote:
Originally posted by Zephyr:
quote:
Personally, I like the open loops. I like the ability to push the cartridges up from the bottom and I never have to worry about the (closed) loops getting too loose to hold the rounds as they stretch. When that happens, with the open loops, just push the rounds further down into the loops. I've had too many rounds fall out of the closed loop type.


There is a lot to be said for open loops no one likes mole shit on there solids...
To cure stretched leather loops I am under the impression that a soaking in water or alcohol will be the cure, but this is a question better asked of Dick Murray.


Yes, that will tighten them up for sure. Trouble is, when you're in the field and a round or two falls out of the closed loop due to stretching, what do you do until getting back to camp that evening to tend to the loops? Put the rounds in your pocket? With the open loops, a bit of water back at camp followed by a drying session will also tighten them up, but while in the field until you can tend to them properly, just push the cartridge further down into the loop to hold it securely. Remember that even a "straight walled" case such as the 500 or 577 is tapered to some degree. Pushing them down further into the loop tightens the grip on the cartridge.

Funny how we'll nit pick this crap to no end isn't it. 26" vs 24" barrels, ejectors vs extractors, bolt vs double ... the list goes on and on! Big Grin

Good thing there are some absolutes though ... such as shootaway being an Ass Clown!
 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
One of Us
Picture of MJines
posted Hide Post
quote:

Sorry Mike... no 26 inch barrel and no closed loops Wink I leave a cigar or two for you in camp for compensation Smiler


No concerns Morten. I figure not being in the same camp with Todd and Nick is actually a validation of my position. Eeker The noble title of dissident must be earned, not claimed.


Mike
 
Posts: 21825 | Registered: 03 January 2006Reply With Quote
one of us
posted Hide Post
I have hunted small game for years with a 12 gauge closed loop leather shot shell belt and never had a shell fall out.I like it when you push them down and they stop and are all even height.
We would put bees wax snow seal on the leather and warm it up so it was absorbed.Walking through the waist high dew soaked weeds would really dry up unprotected leather.This way the belt would last forever and still no shells fell out.Now if you turned the belt upside down and shook it I am sure they would fall out.I am glad my Lott belt was hand made using quality leather and the loops were sewn around my ammo for a snug fit to begin with.
 
Posts: 11651 | Location: Montreal | Registered: 07 November 2002Reply With Quote
One of Us
posted Hide Post
I to like the ammo carrier from Texas Hunt Co. The benefit is you can close it and the ammo stays secure and when you get to where you may need to reload you can open it and it is a secure platform to load from.
http://www.texashuntco.com/Pro...ails.asp?ProductID=5
True this isn’t a traditional style belt but I think it works better.
Bill


Member DSC,DRSS,NRA,TSRA
A man who carries a cat by the tail learns something he can learn in no other way.
-Mark Twain
There ought to be one day - just one – when there is open season on Congressmen.
~Will Rogers~
 
Posts: 1132 | Location: Fort Worth, Texas | Registered: 09 May 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Todd Williams:
quote:
Originally posted by The Norwegian:
I have taken a look on Todd's video again and the report from Nickh and both use the Murray belt with open loops. Looks nice and I agree and will probably follow your recommendations.

Sorry Mike... no 26 inch barrel and no closed loops Wink I leave a cigar or two for you in camp for compensation Smiler


Hey Morten, you're getting it now. We just need to get you off of those beavertail fore-ends and love of Blasers and you'll be all set! barf on both of those!

Cool


Well Todd, wait and see about the small beavertail on my new VC - maybe you will be surprised ? Smiler You have to wait a while though.. it is going to be produced first, then it travels to London for color case hardening and then back for finish .. delivery in beginning of 2015 ! Cool

About the Blasers; I will send you a Blaser family picture as soon as the new one arrives. I am as stubborn as you are in these matters .. beer


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of twoseventy
posted Hide Post
texashuntco.com They have very good daypacks and other accessories for hunting. I have used their products and their customer service is very good.

Tom

quote:
Originally posted by The Norwegian:
quote:
Originally posted by twoseventy:
Texas Hunt Co. Works well and will last.

Tom


Tom,
du you have an internett address to Texas Hunt Co ? I understand they some other nice products as well I would like to have look at.

Morten


...I say that hunters go into Paradise when they die, and live in this world more joyfully than any other men.
-Edward, duke of York

". . . when a man has shot an elephant his life is full." ~John Alfred Jordan

"The budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed lest Rome become bankrupt. People must again learn to work, instead of living on public assistance." Cicero - 55 BC

"The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." - Ayn Rand

Cogito ergo venor- KPete

“It is not from the benevolence of the butcher, the brewer, or the baker, that we expect our dinner, but from their regard to their own self-interest. We address ourselves, not to their humanity but to their self-love, and never talk to them of our own necessities but of their advantages.”
― Adam Smith - “Wealth of Nations”
 
Posts: 989 | Location: Oregon | Registered: 12 June 2009Reply With Quote
One of Us
Picture of cal pappas
posted Hide Post
quote:
Originally posted by Todd Williams:
quote:
Originally posted by cal pappas:
I don't always agree with Todd but in this case open loops are the only way to go. Not only can the cartridges be extracted more easily but both a pull and a push, but the closed loops pick up and hold water, dirt, and mole shit.
So, Todd, old mate, I'm with you on this one. However, I will leave you to your Blasers and admiration of Shootaway.
Cheers, gents.
Cal


Cal, somehow I think you got the wrong message from that Blaser/shootaway comic thread. In reality, I'm not sure which of the two I DESPISE more!

Just to be clear on the matter ... One is a totally useless Piece of S&*T. The other is an absolutely ugly rifle! barf

Other than that Cal, I really can't remember us disagreeing on anything except the use of proper flat nosed solids in double rifles. beer


Todd:
You're a good mate and I hope you can find the time to visit Alaska and join us for a double shoot--perhaps this May.

I agree with you and was just pulling your leg. You are spot on about both Shootaway and Blaser. I was sad to learn Blaser bought London Rigby. Kind of like a porn star buying the Miss. America contest.

Cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
 
Posts: 7281 | Location: Willow, Alaska | Registered: 29 June 2009Reply With Quote
One of Us
posted Hide Post
Maybe there is a BlaserRigby on its way ?

A total Rigby tool with Blasers name on it ! What then gentlemen ? animal


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
posted Hide Post
Boyt makes nice 5 and 10 round slides. I use the magnum ones for nitros. You can get them from Calelas. Also Jeff's Outfitters has some pretty good ones.
 
Posts: 2837 | Location: NC | Registered: 08 July 2006Reply With Quote
One of Us
posted Hide Post
I know Sam, but the Boyt slides are closed ! I would like them open !


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
quote:
Originally posted by cal pappas:
quote:
Originally posted by Todd Williams:
quote:
Originally posted by cal pappas:
I don't always agree with Todd but in this case open loops are the only way to go. Not only can the cartridges be extracted more easily but both a pull and a push, but the closed loops pick up and hold water, dirt, and mole shit.
So, Todd, old mate, I'm with you on this one. However, I will leave you to your Blasers and admiration of Shootaway.
Cheers, gents.
Cal


Cal, somehow I think you got the wrong message from that Blaser/shootaway comic thread. In reality, I'm not sure which of the two I DESPISE more!

Just to be clear on the matter ... One is a totally useless Piece of S&*T. The other is an absolutely ugly rifle! barf

Other than that Cal, I really can't remember us disagreeing on anything except the use of proper flat nosed solids in double rifles. beer


Todd:
You're a good mate and I hope you can find the time to visit Alaska and join us for a double shoot--perhaps this May.

I agree with you and was just pulling your leg. You are spot on about both Shootaway and Blaser. I was sad to learn Blaser bought London Rigby. Kind of like a porn star buying the Miss. America contest.

Cal


I'll be in Alaska early September. I'd love to stop by for a little range session! beer
 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
One of Us
posted Hide Post
Todd, bring a RigbyBlaser

jumping


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
one of us
posted Hide Post
I like Dick's closed nylon version, and have also used a Tex Hunt Co. slide on that belt. Good stuff all, but I still preffer to have two on my right wrist, in that I load with my left hand. Hunting tuskless around large cow herds will do that to you. Mine is homemade nylon, but I recall brother Jines had a nice leather wrist band.
 
Posts: 596 | Registered: 17 December 2003Reply With Quote
One of Us
posted Hide Post
Norwegian,

Just do like Todd did and take a chain saw to the bottom of the loops.

Sam
 
Posts: 2837 | Location: NC | Registered: 08 July 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by HBH:
I like Dick's closed nylon version, and have also used a Tex Hunt Co. slide on that belt. Good stuff all, but I still preffer to have two on my right wrist, in that I load with my left hand. Hunting tuskless around large cow herds will do that to you. Mine is homemade nylon, but I recall brother Jines had a nice leather wrist band.


That was interesting to learn about. Maybe Mike can fill in with a photo of it and where to find this ?


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by srose:
Norwegian,

Just do like Todd did and take a chain saw to the bottom of the loops.

Sam



He did ?? You must be kidding me !?

jumping

Morten


The more I know, the less I wonder !
 
Posts: 1144 | Location: Oslo area, Norway | Registered: 26 June 2013Reply With Quote
One of Us
Picture of Todd Williams
posted Hide Post
quote:
Originally posted by The Norwegian:
quote:
Originally posted by srose:
Norwegian,

Just do like Todd did and take a chain saw to the bottom of the loops.

Sam



He did ?? You must be kidding me !?

jumping

Morten


That's actually not far off the mark! I purchased a leather culling belt from Cabelas, really not sure of the brand any more as it's been awhile. Got damed tired of loosing rounds out of the top of the loops, even with the wetting and drying method as they would continue to stretch during each outing.

So I took a box cutter to the bottoms and opened them up. If you look closely at my 500NE belt, you'll see the bottom line is crooked from my hack job. One of these days I'm going to clean up that belt and make it look proper. But for now, it works and works well. One thing I have begun doing however, and this goes along with my theory of cutting as much weight as possible on those long, hot tracking jobs of late season, but which also helps tremendously in speeding up reloading the double, is to place two rounds, skip one, two rounds, skip one, etc. This gives me 10 rounds on the belt plus two in the chambers and separates each reload from the next on the belt.

Here's a pic of that belt loaded:

 
Posts: 8530 | Registered: 09 January 2011Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Double Rifles    Any suggestions for a cartridge belt ?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia