one of us
| I too have a CZ 527 american that has beautiful wood. I topped it with a Leupold VX-II 4x12x40mm AO. That thing will shoot 1/2" groups all day with both Remington factory loads. Mike |
| Posts: 49 | Location: Texas | Registered: 07 April 2002 |
IP
|
|
one of us
| Quote:
The .22 Hornet may be the least accurate sporting smokeless rifle cartridge ever. If all such guns were fired for score I would expect a Hornet to score near the last place. And this is a gun to hit small targets yet!
I had Hornets. Thanks to the 222 Rem and handloading I did not need the Hornet.
That HAS to be one of the most IGNORANT and STUPID quotes I have ever seen here in AR!
You want PROOF of how well a Hornet shoots?Take a lok at the test targets of the Anshutz 1700 series m54 actioned sporters in both the Hornet and the .222 sometime!
The .222s shoot no better than the hornets do.As a matter of fact the BEST Hornets I have owned have outshot the best .222s I have owned! The .222s were Sakos,while the Hornets were Browning 1885 single shots.
Only an idiot with a poor quality rifle and/or no knowledge of basic accuracy loading techniques could not get a Hornet to shoot as well within it's range as any other .22cal varmint round..
What an bonehead. |
| |
one of us
| Quote:
I have 5 hornets but the best is still a 1949 Brno ZK465. Topped with a 6x Kahles scope it is a perfect small varminter.
BadAss said it - try to get one of your own. Here is mine, a 1948 with a Leupold VX-1 2-7x33. I love it, and it's the only gun that I'll keep the rest of my life.
Fritz |
| Posts: 846 | Location: Sweden | Registered: 19 April 2001 |
IP
|
|
one of us
| Have a lot of areas around here to hunt woodchucks with a light rifle that doesn't make much noise. Been using the 17hmr but would like a little more. Also I am able to hunt turkeys in the fall with a rifle. I am looking to get a 22 hornet as my .223 is two big for the job and the 17hmr to small. What rifle would anyone recommend? Also are there any other quiet rounds out there that might be suitable for my woodchucking and tough enough to kill turkey? Don't go overboard as even a .222 is to noisy for the places I hunt chucks. |
| Posts: 725 | Location: Upstate Rural NY | Registered: 16 July 2004 |
IP
|
|
one of us
| My wife has the CZ American in 22 Hornet. Most accurate rifle right out of the box I have ever seen. Price is resonable, also. Pete |
| Posts: 403 | Location: Emeryville, CA | Registered: 24 July 2002 |
IP
|
|
one of us
| Do you handload? If so try 10 grs of 2400 powder behind a Nosler 45 gr SB and you'll have a very quiet and accurate slighty lower powered hornet in your .223. If your really wanting a hornet get a old Sako L46 clip one....talk about class! Otherwise just get a boring old CZ 527 and shoot 3/4" groups right out of the box <yawn> Oh and other great hornet rifles, Anschutz makes one that is super accurate and Walther made the KKJ in a hornet and the older Brno hornets have wonderful craftsmanship. FMMauser |
| Posts: 170 | Location: Kentucky U.S.A. " The land that is dark with blood" | Registered: 31 May 2004 |
IP
|
|
one of us
| The Hornet is a great little cartridge and perfect for the uses you describe. In my opinion, there are far too few good rifles chambered for .22 Hornet (on an appropriate action).
One rifle which should be a ringer but has a reputation for poor performance is the Ruger 77/22H. I have one that is a great shooter, but the previous owner invested twice the price of the original rifle in getting it that way.
The Browning A-bolt is nice, but it's made on an action that is way too large for the Hornet.
The CZ mentioned above has a reputation as a good shooter, but I don't happen to like the clunky bolt which requires higher scope mounts. Otherwise, it's a good buy.
Old Kimbers are super, as are Coopers, but you're looking at a potload of money for one of these. An occasional Sako 78 surfaces, but they're pricey also.
Charles Daly was cataloging an economical Hornet, but I don't know if any have ever made it into the country (and I don't know it's qualities or lack thereof).
If you are not a bolt action purist (as I tend to be) and don't mind a single shot, then the Thompson-Center flop-open action, cumbersome and unfriendly as it is, is usually a good shooter. |
| Posts: 13266 | Location: Henly, TX, USA | Registered: 04 April 2001 |
IP
|
|
new member
| hi crazyjjk a bsa hunter is a great rifle if you can find one yourside of the pond hinged floorplate no problems with seating bullets out to the lands as can be a problem with the ruger with limited o/a length in rotary mag very accurate balances excellent the brno/cz are very accurate also but the bolts are no where as nice to operate i have just found 1 for a friend and he is delighted with his 40 year old bsa regards steve |
| Posts: 21 | Location: new europe | Registered: 28 September 2004 |
IP
|
|
one of us
| Anshcutz 1700 very accurate |
| Posts: 590 | Location: Georgia pine country | Registered: 21 October 2003 |
IP
|
|
one of us
| I have two Anschutz Hornets, one is the 1730 Meistergrade rifle and it consistently shoots in the .3's. The other is a bolt pistol called the Exemplar that ceased production in the mid 80's, I have a 3X12 Burris on it and it's the first handgun that I've ever shot a 5 shot 100 yard group under a half inch with. I also have a Cooper K Hornet that shoots right with the Anschutz Meistergrade. All of these cost a lot more than a guy ought to spend on a toy and the only reason I mention them is to point out the following. About a month ago I purchased a CZ 527 American in .22 Hornet to have built into a .17 Ackley Hornet. I decided to shoot it as a Hornet just to make sure the action was straight etc. I didn't work up a specific load, I just grabbed a box of 50 set up for the Anschutz they chamberd well and we went shooting. For anyone interested the load was 13.2 grains of Lil'Gun under a 40 grain V-Max in a WW case with a WSR primer (chrono's 3,000ish in the Anschutz) and shoots bugholes. I'll try to post a picture of one of the better 5 shot 100 yard groups. Point being the CZ cost $430.00 the Anschutz and Coopers over 3 times that, pick your poison. By the way the CZ has a wonderful single set trigger, I adjusted mine to break unset (cold fingers hunting in the winter) at 2 1/2 lbs and set (bench or p-dogs) at 10 oz. http://outcast.homeunix.org/uploads/CZ .22 Hornet groups 19.JPG [image]http://outcast.homeunix.org/uploads/CZ .22 Hornet groups 19.JPG [/image] |
| Posts: 1181 | Location: Bozeman Montana | Registered: 04 April 2003 |
IP
|
|
one of us
| |
| Posts: 1181 | Location: Bozeman Montana | Registered: 04 April 2003 |
IP
|
|
one of us
| The CZ is a nice rifle. I do not like the mag or the safety. I use Rem and it is backwards, but with out a doubt they are the best bang for the buck, just butt ugly IMO (Sorry Doug). I have a Browning Micro. It works well and was very accurate with 35gr Hornady factory stuff. I had it rebarreled to a 17AH for the same reason you are looking at the Hornet. This gun shoots. I know I am going to get roasted on this one, but James Calhoon makes a Ruger 77/22 Hornet in his 19 Calhoon shoot with the best of them. He even makes loaded ammo that is not terribly priced. I had an aweful 77/22 Hornet but they seem to have it down now. Good luck |
| |
one of us
| I had the ruger 77/22H vzh( heavy barrel stainless/laminate) and found it to be accurate only when necksizing it. I found it had an excessively large chamber ( measured against SAAMI specs) but had no problem loading it to the lands with the rotary mag. I was thinking of getting a gunsmith to set it back and cut a medium to minium size chamber to get better accuracy. I would buy another one of those rifles though, overall it was an OK rifle. I think the CZ would be my pick though. |
| Posts: 168 | Location: Kalgoorlie, Australia | Registered: 03 August 2004 |
IP
|
|
one of us
| I favor the CZ and have a hornet Lux model but if I didn't already have one I'd consider a Contender carbine or Encore rifle in Hornet. |
| Posts: 338 | Location: Johnsburg, Illinois | Registered: 15 December 2002 |
IP
|
|
one of us
| For half the price of another rifle you could get a handloading outfit and make "Hornet" loads for your 223. Your reduced loads will, on average, be more accurate than most Hornets anyway.
The Speer handbook gives reduced loads and so does Hodgdon and many other sources. |
| |
one of us
| Quote:
Where do you hunt turkeys in upstate NY with a rifle. I have always thought that shotgun (or archery) only.
Fill me in please.
I live near the PA border and hunt both states. Legal to use a rifle for fall birds in PA. |
| Posts: 725 | Location: Upstate Rural NY | Registered: 16 July 2004 |
IP
|
|
one of us
| Thanks for all the reply's guys. As for downloading the .223 I really don't want to do that for two reasons. First my 223 is a ruger 77 that holds .5 moa and I have not had to adjust the scope in over 15 yrs. I also use it a lot for other critters so I do not want to be changing scope settings all the time especially since it is a Leopold 8X with friction adjustments not click adjustments. Second even though I don't need an excuse for buying a new rifle it's always good to have one. As for rifle choice I guess I was leaning towards the CZ even though I don't like the mag. I have three other CZ's and they are all shooters. Though if an older Sako or some other decent grade rifle comes along I would have to say my mind is not totally set on the CZ. |
| Posts: 725 | Location: Upstate Rural NY | Registered: 16 July 2004 |
IP
|
|
one of us
| ..I shoot a Contender carbine in the K version of the hornet, and it's probably my favorite rifle.... that having been said, I think Savage is coming out with a rifle chambered for the hornet... it looks to be a pretty nice rifle, if not perhaps a little heavy... to me, a hornet needs to be borderline petite to be worth lugging around.. the contender carbine with a synthetic stock is about as small and light as you can get... and I have never heard anyone report less than "really good" accuracy..... mine doesn't shoot in the "3's" .... heck, I can't even SPELL "3's".... but it is an honest less than moa rifle... mostly about .75" at 100... some better, a few worse.. depending on the shooter... |
| Posts: 323 | Location: N.Central Texas | Registered: 28 December 2002 |
IP
|
|
one of us
| There is a gunsmith who hangs around on the Saubier list ( www.saubier.com) who does a nice mod to the CZ and somehow moves the magazine up into the rifle. Not sure how it works, but if I get a CZ, I was going to look into it. Good luck, Kory |
| Posts: 860 | Location: Montana | Registered: 16 August 2004 |
IP
|
|
one of us
| Fritz Kraut, B.A.W. :
I have a Brno ZKW 465 Hornet. How can I tell what year it was made?
All : Somewhere along the line my Hornet was "K"ed, and it now has a long throat of generous diameter. Combined with the slow rate of twist and short magazine length, load development was a challenge. I have found some loads that group respectably on days with light winds. Overall though, I would have to say that my "K" Hornet is a lot fussier than my 2 SAKOs and Rem. Model 788 in .222 Rem. And even if the inherent accuracy were equal, the .222's do a much better job of contending with the wind. The "K" Hornet has a higher fun coefficient though, significantly less recoil and noise, and those "K" Hornet cartridges look like miniature 416 Rigbys.
rollinghills |
| Posts: 107 | Location: Ontario, Canada | Registered: 28 October 2001 |
IP
|
|
new member
| I think the best value in a hornet is the Charles Daly superior grade Mini Mauser. When I first got mine I wnet to the range with a buddy carrying his CZ American .22 Hornet. TO make a long story short, by the end of the day he was tring to figure out how he could trade his CZ to get a CD Superior grade like mine. Most shops have them for around 5 bills. |
| Posts: 11 | Location: Berkeley Springs, West Virginia, USA | Registered: 28 September 2003 |
IP
|
|
one of us
| Quote:
I have a Brno ZKW 465 Hornet. How can I tell what year it was made? rollinghills
On the left side of the barrel base there is a two digit number. My rifle is stamped "48". I don't think it is the year of production but of the proof test, which usually coincides. |
| Posts: 846 | Location: Sweden | Registered: 19 April 2001 |
IP
|
|
one of us
| Quote:
I think the best value in a hornet is the Charles Daly superior grade Mini Mauser. When I first got mine I wnet to the range with a buddy carrying his CZ American .22 Hornet. TO make a long story short, by the end of the day he was tring to figure out how he could trade his CZ to get a CD Superior grade like mine. Most shops have them for around 5 bills.
You have a REAL, LIVE, "IN THE FLESH" Charles Daly Mini Mauser??
After all the waiting games CD has played with these guns ,I thought they would NEVER be available.
I have owned BOTH an Interarms Mini Mark X(same basic gun as the new Charles Dalys) and a CZ 527 American in .223.The Miini Mark X was built in 1990(just before the Yugoslav arms emabargo) and the CZ was an '02 version.
The CZ m527s are very nicely made guns.It is their DESIGN features that are lacking.The clip mag SUCKS,The reversed safety SUCKS,and the scope bases in the reciver reduce the flexibility of scope mount choices.The CZs miniature controled round mauser bolt is REALLY cool and I like the set trigger as well.
The Mini Mark X I owned was one of the most accurate factory .223's I have ever owned.When the action skim bedded and the barel floated the little sucker would drive EVERY Factory load into less than MOA and MOST at less than half that! It was a great little gun and I wish I had not sold it.
I was able to lengthen the inside of a friend's m527 .22Hornet magazine box to seat out any reasonable .22 bullet for best accuracy.My question to you is-first how smooth is the action on the CD Mini? Is the clip mag on you hornet long enough to seat bullets out properly?? |
| |
one of us
| Fritz Kraut :
Thank you for the information. It appears that my ZKW 465 was made in 1963.
rollinghills |
| Posts: 107 | Location: Ontario, Canada | Registered: 28 October 2001 |
IP
|
|
one of us
| Fritz,
To each his own...
Respectfully,NO bolt action rifle has been successfull in the modern US market if it does not have -
1) at least the OPTION of a flush mounted floorplate magazine(like a Mauser)..
2) a safety that works from back to front when being released(no matter where it is mounted on the action).
Sakos have been very successful in the US here for many years and offer the above features. Most models of the CZ 550 large bore rifles have them as well.I would ALREADY own a CZ 527 Hornet if it had the above features.
As to the scope mounts,Actually ,I don't mind the intregal rails myself-BUT it DOES severly limit the number of ring mount systems one can use...
Since 99% of the time using a diffent bullet/load combo changes the point of impact,most of us Americans keep things simple and don't change ammo back and forth in the field.One well chosen loaded with a good zero is all most of us need.
To most of us,the CZ clip mag is really ugly and of no more advantage that a 4 or 5 shot drop floorplate magazine... |
| |
new member
| Guys , I have a stainless Continder Carbine with black synthetic stock from Choat ,21" barrel, and 3X9 scope . This is a great gun and provides sub moa groups with handloads . Most factory stuff is about 1 moa.This is my primary calling gun because it's easy to jump out of the truck ,load up ,move into position and call yotes.After 15 min. I head back up to the truck unload very quickly and head down the road to my next stand .I use 40gr Nozzler BT's with 13.3grs of AA1680 ,and Rem.small pistol primers.I neck size only with a Lee Collet die .
I have a 527 in 223 and I like it very well too . It's not quite as handy as the Continder but still very quick to load and unload.Mine is the 527 American with the 18" barrel and it seems to shoot every load good. |
| Posts: 8 | Location: West Tennessee | Registered: 08 November 2003 |
IP
|
|
one of us
| The only reason why CZs outsell SAKOs currently here is avaiablity(Beretta's screwed up marketing schemes) and the price of Sakos right now nearly three times as much as a 527.
The real point is,if the m527 had the magazine and safety design of the Mini Mausers the rifles would be nearly impossible to get.They would be that popular.
One other thing,for about the last five years the m527 has had NO competiton in the US rifle market with regards to a true .223 length action in the $600 and under retail price range.Once the Charles Dalys start coming into the US in quantity,that will all change. |
| |
one of us
| Quote:
---The real point is,if the m527 had the magazine and safety design of the Mini Mausers the rifles would be nearly impossible to get.They would be that popular.
1. The magasine design of the Brno is necessary, as you cannot hardly load rimmed cartridges out of a standard bolt magasine.
2. The saftey on the Brno is safe and reliable, and blocks the striker. The Zastava aka Ch. Daly has a common trigger block safety, which not quite as reliable as the Brno striker block. Brno is the only european rifle with that feature, but three fine american ones also have it: Winchester, Ruger and Weatherby.
But tastes differ...
Best regards,
Fritz |
| Posts: 846 | Location: Sweden | Registered: 19 April 2001 |
IP
|
|
one of us
| Charles Daily has the same mag set up on the Hornet as the CZ. I looked at them before I bought the Browning. I had to choose from the Browning and the 77/22. Sakos are all but impossible to find then pay gun show prices. I think the CZ is about the ugliest backwards saftey rifle on the market. They really shoot tho, and have beautiful stocks. |
| |
One of Us
| I have a cz 527 American and mounted a leupold 3-9x50 Vari X 11 on it in Lynx mounts. I load the 45 gr sierra .224 hornet bullet infront of 11 gr of win 296....I think my next batch is 11.5gr. I use a rem case and rem 7 1/2 primer. For some reason my rifle really liked the rem small primers. It shoots good and has served me well for foxes and rabbits. I got told by a number of people to steer well away from the Ruger .22 Hornet due to poor accuracy. |
| |