new member
| yep same as mine!! |
| | | Posts: 1 | Location: Sweden | Registered: 13 December 2006 | 
IP
|
|
One of Us
| quote: Originally posted by 333_OKH:
If you measure the lands and not the grooves, my 1903 is a regular .264
So, you are saying that the groove diameter of your M/S 6.5 is somewhere around .272"? If so, that is WAY oversize. They should have a bore (land) diameter of .256" or so...... I have two of the Greeks. One shoots .264" bullets very well, and the other is a dog even with .268" bullets. (Groove on this one looks to be around .272", and it would have to be rebored to at least .276" to clean it up for rerifling to .284" so 7mm bullets could be used in 6.5 M/S cases for this rifle..... in effect, a "7X54 M/S"...... Such a dummy does feed from the magazine.
"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
|
| | | Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005 |
IP
|
|
One of Us
| My Mannlicher is a 0.264 bore, cannot be more definitive LLS |
| | | Posts: 996 | Location: Texas | Registered: 14 October 2004 |
IP
|
|
one of us
| Ok guys what are the groove diameters of all of these .266 and .264 bore rifles? |
| | |
One of Us
| 6.5X54 MS .263 |
| | | Posts: 269 | Location: South East Florida | Registered: 01 August 2005 |
IP
|
|
