THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
35-348AI ?
 Login/Join
 
One of Us
posted
Found this wildcat mentioned in an article on the 348win. I am some what of a 348 queer and did some looking but have found nothing on it. I am just looking for info.


“I am an American; free born and free bred, where I acknowledge no man as my superior,
except for his own worth, or as my inferior, except for his own demerit.”
Theodore Roosevelt (1858 – 1919)
 
Posts: 240 | Location: texas | Registered: 05 March 2005Reply With Quote
One of Us
posted Hide Post
Wolfe Publishing's _Rifle_ and _Handloader_ and their compendiums on wildcats and big bore rifles have had many articles on 348 wildcats over the years. Perhaps their index would help you find some useful back issues? Good hunting!
 
Posts: 299 | Registered: 11 January 2005Reply With Quote
one of us
posted Hide Post
Dick:

P.O. Ackley's Handbook contains info on this wildcat. Basically the cartridge is the .348 Winchester which is improved and necked up to accept .35 caliber bullets. Here is some sample data from Ackley's book:

180 gr. bullet 67 gr. 4064 = 3007 fps
200 gr. bullet 67 gr. 4320 = 2817 fps
220 gr. bullet 66 gr. H380 = 2597 fps
250 gr. bullet 63 gr. H380 = 2564 fps

Says Ackley: "this cartridge should prove to be the best of the family of cartridges based on the 'improved' .348 case."

Hope this helps

Jordan
 
Posts: 3478 | Location: Northern California | Registered: 15 December 2003Reply With Quote
One of Us
posted Hide Post
Thanks for the info. I should have thought of Ackley's books. I realy need to get to the woods!


“I am an American; free born and free bred, where I acknowledge no man as my superior,
except for his own worth, or as my inferior, except for his own demerit.”
Theodore Roosevelt (1858 – 1919)
 
Posts: 240 | Location: texas | Registered: 05 March 2005Reply With Quote
one of us
posted Hide Post
I would have thought the 450 Alaskan was the best in this line - only because of bullet choice
 
Posts: 787 | Location: Melbourne, Australia | Registered: 15 January 2002Reply With Quote
one of us
posted Hide Post
I would so love a 350-348 short, to fit in a Marlin.
Seems to me, the 30-cal version would be the best, assuming you could get some good 150g and 200g FN bullets for it.


Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
new member
posted Hide Post
What action are you considering? Years ago I saw a .35/348 AI built on the Siamese Mauser.
 
Posts: 19 | Registered: 27 August 2004Reply With Quote
one of us
Picture of HunterJim
posted Hide Post
Jim Busha built two lines of cartridges based on the .348 Win converted to rimless and improved to 40 degree shoulders. His Heavy Express Magnum .350 HE Mag is reported by him to do the following:

200 gr bullet at 3,050 fps MV
225 gr 2,950
250 gr 2,860

This data was taken from a bolt gun with a 24" barrel in Colorado Springs (6,000 ft elevation) at 15' from the muzzle.

jim


if you're too busy to hunt,you're too busy.
 
Posts: 4166 | Location: San Diego, CA USA | Registered: 14 November 2001Reply With Quote
one of us
posted Hide Post
Right, wasn't that the 2.8" round? Pretty much the WSM Imp.


Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
 
Posts: 2000 | Location: Beaverton OR | Registered: 19 December 2002Reply With Quote
one of us
Picture of HunterJim
posted Hide Post
The .350 HE Mag used a 2.25" case, 40 degree shoulder and 3.1" overall length.

I expect Jim B. would say the WSM is a variation of his cartridges. Wink

jim


if you're too busy to hunt,you're too busy.
 
Posts: 4166 | Location: San Diego, CA USA | Registered: 14 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia