404-375 H&H Hornady Dies

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6521043/m/7481084602

11 December 2014, 20:28

DArcy_Echols_Co

404-375 H&H Hornady Dies

I just had a long conversation with an engineer at Hornady. He called to confirm a few things in regard to making 2 die sets for the 404-375 H&H. The MSRP cost for these 2 die sets will be $185.00. This die set will also allow the hand-loader to use Basic Hornady cases to form the parent case if they prefer instead of necking up standard 375 H&H case to begin with.

Hats off to Hornady once again for taking up the challenge when asked to do so.

06 February 2015, 04:01

Jgrabow6493

Got mine and the price is $185.00 + $13.95 S&H.

06 February 2015, 05:31

boom stick

Thanks for the good news and update

577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)

07 February 2015, 00:45

DArcy_Echols_Co

I also just received 2 sets of Hornady 404-375 H&H Dies as well. I Just ran some of the Hornady basic brass through the sizing die and the results were as expected, excellent.

22 February 2015, 23:31

Cold Trigger Finger

Any pics of fireformed and reloaded rounds. ??

Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."

07 May 2016, 17:43

Jgrabow6493

Here's a picture of basic brass before resizing, a fire formed and then reloaded round and a 375 H&H factory round.