THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Looking for loads for my 416 Taylor.
 Login/Join
 
One of Us
posted
Looking for loads for my 416 Taylor.
I have a couple now for 4320 and RL15.
Any other loads or powders to suggest? BLC2? H414? RL7? Thanks for all replies.
 
Posts: 186 | Location: High in the Rockies | Registered: 29 October 2005Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
Another semi-popular choice for the 416T is IMR 4895.

If you do an advanced search on the big bores forum for "416 Taylor" you'll probably find quite a bit of info. Lots of guys have one here.

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
Picture of fireball 2
posted Hide Post
jabs, i have an accurate armaload books with load data for the 411/416taylor. if you want p.m. me and i can p.m you back with the info. dave


when in rome, punt
 
Posts: 66 | Location: northern calif. | Registered: 01 February 2007Reply With Quote
One of Us
Picture of fireball 2
posted Hide Post
http://www.accuratepowder.com/data/PerCaliber2Guide/Rif...lor%20page%20325.pdf
jabs, this is the website for the same data i have. enjoy, you can also go to www.accuratearms.com for all calibers. wavedave


when in rome, punt
 
Posts: 66 | Location: northern calif. | Registered: 01 February 2007Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
http://www.geocities.com/bw_99835/

Is a 416 Taylor site.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
Also, don't forget about Saeed's reloading data pages...here's his data for the 416 Taylor.

Cheers,
Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
One of Us
posted Hide Post
That "little sucker" (if you can call an African DGR getter that) really spits those 400's out!
 
Posts: 3785 | Location: B.C. Canada | Registered: 08 November 2005Reply With Quote
One of Us
posted Hide Post
Went out today and got some great velocities and shot a couple of groups.
Reloader 15 3.33" OAL avg. 5 shots
350gr. Speer
74.0 - 2461fps
75.0 - 2494fps
76.0 - 2523fps 1.4" 100yds open sights

350gr. TSX
74.0 - 2459fps

400gr. Partition
70.0 - 2301fps
71.0 - 2318fps
72.0 - 2339fps 1.8" 100yds open sights
 
Posts: 186 | Location: High in the Rockies | Registered: 29 October 2005Reply With Quote
One of Us
posted Hide Post
I had great results with RL15 .
300 X bullet @ 2700fps with 79.0gr
350 Speer @ 2600fps with 77.0gr.
400gr. Partition @ 2400fps with 73.0gr.
 
Posts: 186 | Location: High in the Rockies | Registered: 29 October 2005Reply With Quote
One of Us
posted Hide Post
350 gr TSX and 72.5 grains of Varget-shoots under an inch in my 16" Encore handgun.

Neal
 
Posts: 79 | Registered: 09 March 2006Reply With Quote
One of Us
posted Hide Post
I have not mounted a scope on my rifle, so MOA is probably a dream for me without a better set of eyes! Wink
 
Posts: 186 | Location: High in the Rockies | Registered: 29 October 2005Reply With Quote
Moderator
Picture of Canuck
posted Hide Post
quote:
400gr. Partition @ 2400fps with 73.0gr.


Another one reaches the mythical 2400fps. Smiler

Seems the only guys that don't get 2400fps with their Taylor's are the guys that don't actually have one. Wink Razzer Big Grin

I get 2400 with a 400gr Hornady SP with 73gr of RL 15 too. NO pressure signs either...I've even posted pics of the case head/primers to demonstrate.

Smiler

Canuck



 
Posts: 7123 | Location: The Rock (southern V.I.) | Registered: 27 February 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia