Go | New | Find | Notify | Tools | Reply |
One of Us |
I've often wondered if anyone has tried to develop a 7mm,30 or 338 cal based off a 404 Jeffery case with a case length of around 2.50".I would think the 7mm would be like a 7STW,the 30 cal like a 300 Weatherby and the 338 like a 340 Weatherby. | ||
|
One of Us |
Look at the Dakota rounds. There´re a 7mm, a .300, a .330 and a .404 Dakota, with case lenghts between 2,5 and 2,57". https://docs.google.com/viewer...ZjN2ZlMTc5MTE0&hl=en Martin | |||
|
one of us |
The Dakotas. Jeffe built his ARs using a RUM (based on the feffery) case and left them 2.55. The Ruger would be darn close but they are 2.58 As usual just my $.02 Paul K | |||
|
One of Us |
I've designed and built a 8mm .404 X 2.5" IMP. Performance is just a little better than a 30-06. It drives a 150 grain bullet at 3150 fps. 185grain at 2970 fps. The neck length is .495". Should have made it .425" or even a little less. roger Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone.. | |||
|
One of Us |
As well as a .375... Nice rounds, good performance and not overbore till sub-30 caliber. Loaded rounds and brass are available directly from Dakota and through a number of the online superstores. Jim "Life's hard; it's harder if you're stupid" John Wayne | |||
|
One of Us |
Yes, sorry, I forgot this round. It´s also listed in the Hornady reloading manual. Martin | |||
|
Moderator |
Mine are 2.55 case -- .050 doesn't make a difference - i didn't go smaller than .416 - the rest of the area is pretty crowded. .458 capacity in mine is about 112gr of capacity .. so, HUGE! good luck opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
Well, Jeffery themselves made them in .280 and .333 waaaay back...... Bent Fossdal Reiso 5685 Uggdal Norway | |||
|
one of us |
It would be more practical to use the 375 or 416 Ruger case, close to what you want and case forming and case availability would be much easier and less expensive..That is basically what the case is anyway with a minor change. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia