Go | New | Find | Notify | Tools | Reply |
One of Us |
Does any one have one of these.. Does any one have a reamer ??? .If it can,t be grown , its gotta be mined .... | ||
|
One of Us |
Try Phil at KDF I know he has one. 830-379-8141. He had a K-15 Titan in there not long ago I think 3 4 months ago. 505ED DRSS Member | |||
|
one of us |
You can get 416 Taylor barrels at Midway for under $100. Lee also made a run of dies that were about $25. | |||
|
One of Us |
...505ED thanks for the phone # I have been looking all over and could not find any recient info on them.....Lar 45 , I,ve had a couple Taylors but have hitched my 416 wagon to the Remington Magnum...Gave away my last 416 Taylor....I got very used to its capabilities and am sure the 411 KDF will do like wise... ..A 300 gr X bullet @ 2700 fps and a 400 gr solid @ 2300 ...But with it I can blast away to my hearts content with 41 mag pistol bullets..... With an 18 " barrel , integral quarter rib scope and express sight base and under barrel recoil lug, integral sling hook eye and front sight base ,,with a# 3 or 4 contour barrel and installed on a stainless Ruger with a kevlar stock it should make a perfact ramblin around rifle..... With a 2-7 illuminated reticle Burris pistol scope and a 2 lb trigger ....it ought to be close to perfact for genral Alaskan hunting ..The goal is less than 8 lbs scoped and loaded..It should be less than a meter long and when sighted in @ 200 yrds be 24 " low @ 400 yrds... and have 4000 ft lbs @ 100 yrds...I may only get 2650 fps w/300 mono metal and may need to go to a boat tail design like the Lost River or GS Custom HV or talk to Lutz Moeller ...... .If it can,t be grown , its gotta be mined .... | |||
|
one of us |
Sounds like too much fun. My son has been wanting me to center drill some cast bullets on the lathe and load in the 470NE to go find Jack Rabbits. | |||
|
One of Us |
Good luck with the 411. I love short barrel guns also. My 500 Jeffery that will be done some time next year will wear a 20in tube. 505ED DRSS Member | |||
|
One of Us |
,,,,I called and talked to Phil....It is a work in progress...I,ll have to at the very least send it to him for a muzzel brake...I,ll get it with a collar,,,.. .If it can,t be grown , its gotta be mined .... | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia