THE ACCURATERELOADING.COM WILDCAT FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
7.62x39 wild cats?
 Login/Join
 
one of us
posted
I know that this sounds stupid, but I noticed that Remington is offering the 799 in 7.62x39. The cartridge, gun combo would be interesting, but what about an improved 35/7.62x39? A 357x39 improved? Probably silly, but could be a fun project.


Mike Allred
 
Posts: 144 | Location: Llano County, Texas | Registered: 16 July 2003Reply With Quote
one of us
posted Hide Post
Not silly at all. I think its been done though. Feed it Lapua brass and a quality 35cal cast pill and it might make a pretty reasonable benchrest cast bullet shooter with application to hunting small to medium sized game.
Cheers...
Con
 
Posts: 2198 | Location: Australia | Registered: 24 August 2001Reply With Quote
one of us
posted Hide Post
Con is correct. There are several wildcats based on the Soviet case. After all, the 6PPC is one of them.

There is no reason a wildcat on that case would not shoot. The secret is in getting good brass, a good barrel and good bullets.

Ray


Arizona Mountains
 
Posts: 1560 | Location: Arizona Mountains | Registered: 11 October 2004Reply With Quote
One of Us
posted Hide Post
I have a 270x39AI which is a 270PPC. A great cartridge for a young persons first deer rifle. It is very accurate.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
I think it was G&A that did an article on a mini 14 rebored to 35/39 imp. They got a 35 rem semi that could shoot spitzers.
I have a 6.5x39 imp. About like factory level 250 sav, my barrel length is only 16 1/2" though.
 
Posts: 941 | Location: VT | Registered: 17 May 2001Reply With Quote
new member
posted Hide Post
A version of this cartridge can be made on the cheap by running a 35 Remington reamer in short. An overall chamber length of about 1.510â€seems about right. As usual, the cases shorten up a bit during fire forming. Remington small primer pocket cases averaged about 1.490¨ in length after fire forming. You can just cut off readily available 35 Remington reloading dies to the correct length and you are up and running without much expense. A CZ 527 carbine originally in 7.62x39mm makes a slick little woods rifle when rebored and chambered this way. The customer who came up with the idea just reported that he has achieved 1950 fps with 200 grain bullets during his early load development. And this is with a 17.5 inch barrel.
 
Posts: 57 | Location: North Central Washington | Registered: 19 June 2003Reply With Quote
one of us
posted Hide Post
I have a CZ527 in 6.5 Grendel, which is essentially a 6.5 PPC.
 
Posts: 454 | Location: Califon, NJ USA | Registered: 18 January 2002Reply With Quote
One of Us
posted Hide Post
there's a guy at the indoor range that shoots a 338x39 in an AR with a silencer and select-fire.
Sort-of a big brother to the 300 Whisper. Very accurate at 25yds. He's some kind of private bodyguard dude here and abroad. It's a cool cartridge for that kind of stuff.

Rich
DRSS
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
one of us
posted Hide Post
Thanks guys, now I have to star looking for parts. I really needed a new project Confused


Mike Allred
 
Posts: 144 | Location: Llano County, Texas | Registered: 16 July 2003Reply With Quote
One of Us
posted Hide Post
Mike, are you part of the Allreds from the Wichita Falls area?
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
posted Hide Post
not that I know of, but there just aren't that many Allreds around. Probably kin somehow.


Mike Allred
 
Posts: 144 | Location: Llano County, Texas | Registered: 16 July 2003Reply With Quote
One of Us
Picture of Kabluewy
posted Hide Post
You guys got my interest with this discussion because I just bought one of the mini-mauser actions set up for the 7.62x39. I had been looking for one for a long time, and I had to pay dearly for it. Many years ago, as I remember Sako made a little action with the correct bolt face, and I missed out on that one.

Anyway, what I had planned for it is a wildcat of sorts, because it will be a handloading chamber/bore only.

I noticed that Pac Nor shows the reamer available - 7.62x39 Laupa. It's using the .308 grove rather than the Russian of .311. Aparantly it anticipates using Lapua brass. I know the Redding 7.62x39 dies come with two expander balls - one for .308 bullets, and a second for .311 bullets.

Seems to me it would be fun to mess with, and may be usable up to deer. I was thinking of maybe a 14" twist .308 barrel, and bullets up to 150 gr, but probably 125 - 130 gr. I think it will get about 2300 fps with the 130 gr bullets, maybe slightly faster.

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia