THE ACCURATERELOADING.COM GUN CLEANING FORUM

Go
New
Find
Notify
Tools
Reply
  
Copper cleaner/ solvent gun cleaners?
 Login/Join
 
One of Us
posted
Hello I am curious what everyone is using for copper cleaning solvents. I have tried barnes, butches bore shine, sweets 7.62 among others and was feeling like it was a lot of work to clean my rifles after shooting them. I was working up some loads for one of my buddies and he gave me some cleaning solvent to clean his guns with and so I used it for his rifles after firing them between load development. I was impressed at how easy it was to use and it did not have the ammonia smell that I hate, and apparently my wife hates even worst ( every time I used it she let me know). I started using it my rifles and now have bought some and will never go back to any of the others again.

sorry so wordy. The gun cleaner of choice for me from now on is Gunslick foaming bore cleaner.

here is the web sight, check it out.

http://www.gunslick.com/

Top
 
Posts: 79 | Registered: 30 October 2010Reply With Quote
One of Us
posted Hide Post
If you reckon gunslick is good, go to the Original WIPE OUT - or as it is now, Wipe Out Patch Out which is easier to use but does
just as good a job.

.
 
Posts: 3191 | Location: Victoria, Australia | Registered: 01 March 2007Reply With Quote
One of Us
posted Hide Post
+1 on patch out, but the gunslick foam does a nice job also.
 
Posts: 171 | Location: East Tennessee | Registered: 13 December 2008Reply With Quote
One of Us
posted Hide Post
what is the difference?
 
Posts: 79 | Registered: 30 October 2010Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by midminnesota:
what is the difference?



What, between Wipe Out and Wipe Out Patch out ?

Wipe out is a Foam Bore Cleaner

Patch out is the same stuff but in liquid form - just put it on a patch and push it down the barrel and then leave it. It's just easier to use.

.
 
Posts: 3191 | Location: Victoria, Australia | Registered: 01 March 2007Reply With Quote
One of Us
Picture of IanD
posted Hide Post
I highly recommend Bore Tech Eliminator and CU+2
 
Posts: 366 | Location: Alberta, Canada | Registered: 13 November 2005Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
I HATE Wipe-out, Gunslick much better. Patch-out for me next time. (Gee Wally Rogers what a mess!!!!!!!!)


_______________________


 
Posts: 4895 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
One of Us
posted Hide Post
Too much info and opinions makes my head spin. 30 years ago or so they were able to clean bores well enough without all the hoopla and solvent choices we must slog through now.
It would seem my so-so cleanings with the new hoppes non-stinky formula works.
 
Posts: 67 | Registered: 13 July 2009Reply With Quote
One of Us
posted Hide Post
I've used many popular copper solvents. The best I've found is KG 12. It takes the work out of cleaning.

The link below shows comparisons between KG 12 and a good number of other solvents including Gunslick and Wipe Out.

http://www.laniganperformance....kg12testresults.html


Cliff
NRA Life Member
CMP Distinguished Rifleman
NRA Master, Short and Long Range
 
Posts: 436 | Location: Fulshear, TX | Registered: 28 May 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia