Starting Headstamp's Contender trigger job yesterday, I took the opportunity to take pix of how I undercut the sear surface on the trigger and put the pic on the store under Tools, with the first item there being the 1/4" square Diamond EZE Lap.

I am showing how to use the body of the trigger and the 1/4" dimension of the lap to set the angle. The 1/4" Wyoming then follows the same angle as the 1/4" lap cut and polishes on the same angle. I did not get the Wyoming Stone pic of the polishing up last night..... blame it on Sean's late night call! ..... which I also indulged in.

I'm going to make the store as informative as I can since it is an easy way for this nimrod to get pics up without having to manage the main site's complexities or burden 1buba too much with all the stuff I want to put up.

Excuse some of the uncropped photos.... haven't quite figured out managing image files yet.

Check it out.

Mike

Nice job on the new site, Mike. Seems to be laid out better and the Pix are great too.

I won't charge you for using my trigger group either.

Regards