THE ACCURATERELOADING.COM DOWN UNDER FORUM


Moderators: Bakes
Go
New
Find
Notify
Tools
Reply
  
Re: Big bore for Australia-Ideas please?
 Login/Join
 
one of us
posted
I'm not from Australia so I don't really have a dog in this fight but I carry a 444 marlin for heavy scrub and big timber hunting where I live. Always gave me a warm and fuzzy feeling with a 265 grain hornady bullet and enough Reloder 7 powder to fill the 30-06 length but fatter width shell. Mine is a lever but you can buy them in bolt action. It will make a deep and lasting impression on anything here so it should be good for Oz.

Gerry O' (aka Bellhender)
Prince George B.C.
Canada
 
Posts: 78 | Location: Western Canada | Registered: 23 February 2003Reply With Quote
one of us
Picture of oneills
posted Hide Post
I would pick either the 35 whelan or 9.3 x 62,or you could go a Marlin 1895 in 444 or 45/70.
 
Posts: 73 | Location: Vic, Australia | Registered: 19 November 2002Reply With Quote
One of Us
Picture of NitroX
posted Hide Post
Probably the original would have been the .375/303

With 220 gr Taipans probably a devastating pig killer, and lots of cartridges in a SMLE too.
 
Posts: 10138 | Location: Wine Country, Barossa Valley, Australia | Registered: 06 March 2002Reply With Quote
one of us
posted Hide Post
Carl Scholtz Gunshop in Brissie has a reamer to do 338'06,I was talking to the owner and he got the gear to do one for himself,"one of these days".



I went down to Rebel Gunworks today and checked out their CZ's,here is what I found;

.375 H&H=9.3lbs

9.3x62 =7.3lbs



Picked up a Woodleigh Bullets sheet while I was there.



 
Posts: 514 | Registered: 07 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia