The Accurate Reloading Forums
Re: Big bore for Australia-Ideas please?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/5621043/m/45410468

01 January 2004, 10:38
bellhender
Re: Big bore for Australia-Ideas please?
I'm not from Australia so I don't really have a dog in this fight but I carry a 444 marlin for heavy scrub and big timber hunting where I live. Always gave me a warm and fuzzy feeling with a 265 grain hornady bullet and enough Reloder 7 powder to fill the 30-06 length but fatter width shell. Mine is a lever but you can buy them in bolt action. It will make a deep and lasting impression on anything here so it should be good for Oz.

Gerry O' (aka Bellhender)
Prince George B.C.
Canada
03 January 2004, 04:33
oneills
I would pick either the 35 whelan or 9.3 x 62,or you could go a Marlin 1895 in 444 or 45/70.
03 January 2004, 13:54
NitroX
Probably the original would have been the .375/303

With 220 gr Taipans probably a devastating pig killer, and lots of cartridges in a SMLE too.
05 January 2004, 18:20
Far Canel
Carl Scholtz Gunshop in Brissie has a reamer to do 338'06,I was talking to the owner and he got the gear to do one for himself,"one of these days".



I went down to Rebel Gunworks today and checked out their CZ's,here is what I found;

.375 H&H=9.3lbs

9.3x62 =7.3lbs



Picked up a Woodleigh Bullets sheet while I was there.