I was looking for sources of 7x65R brass when I came accross this company. Can anyone tell me anything about them? How is the quality of their brass? Any information or other recommendations would be most appreciated.
Thanks

In 9 mm and .357 its o.k. I have had my worst experiences with high praised RWS brass: .357 would split upon 2 nd sizing!

In that rimmed caliber your choices are limited: RWS, Geco ( cheap line from RWS ), Norma, Lapua?, Sellier & Bellot, Blaser. I would give it a try.

Have fun, Hermann

I friend of mine is very happy with them in 270 Win

Hirtenberg brass it's for me soft and incosistent on weight even in the same box , I have five cases with a flash hole of a mere 0.75 mm ( and five broken decaping pins ) I'll post a photo of this cases tomorrow , want to swap 7 x 65R for 7.5x55 cases ?

Saludos

Daniel

Here you have the link to the flash holes in the 7 x 64 HP cases .

http://www.niwala.com/cazadores/upload/493.jpg

Compare with a standard flash hole in the RWS case at center

Saludos

Daniel

[ 02-14-2003, 12:20: Message edited by: Daniel M ]

I experienced the same flashole problem in Hirtenberger 7x64 and 7x65R cases, got bored of it and just threw them away.