THE ACCURATERELOADING.COM VARMINT HUNTING FORUM


Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Coyote pic
 Login/Join
 
One of Us
Picture of gumboot458
posted
Not really shot with a varmint rifle


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
one of us
posted Hide Post
Rifle shoots varmint. Varmint dies. Therefore Varmint rifle.
Caliber or configuration dosen't matter. Results do.

muck
 
Posts: 1052 | Location: Southern OHIO USA | Registered: 17 November 2001Reply With Quote
One of Us
Picture of Buglemintoday
posted Hide Post
What caliber is the rifle? Range? Tell us more!!!

Well furred dog !


"Let me start off with two words: Made in America"
 
Posts: 3326 | Location: Permian Basin | Registered: 16 December 2006Reply With Quote
One of Us
Picture of gumboot458
posted Hide Post
......Range approx 35 yrds ......Rifle Custom CZ550 in 416 Rem mag ....Scope 1.5-6x40 Edot Burris Sig. Select .....I was sitting at my kitchen table talking to my gunsmith on the phone when this coyote comes walking along the edge of the field .........I told Mark to hang on I had to shoot a coyote ,, He said WHAT , I said ,hang on ...I had the rifle leaning against the door frame trim .....I got up and chambered a round , then opened the inner door , , the varmit was still there so I turned on the e dot and thot ,,, when I open the screen door it will bolt ...It didn,t ,so up came the rifle and kaboom ......I have never seen an animal die any faster .......The load was a 350 gr. moly coated Speer bullet over 75 gr AAC 2015BR lit by a fed 215 primer ...It,s just a blastin load so I haven,t chronographed it but it should be doin around 2600 fps ....Imidately after the shot I grabbed the phone and said , Did you hear that ?.he said, what was that , I got him ,I said ,,, Gotta go skin a coyote ....Latter ....That is the truth by the way .........


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
One of Us
Picture of Buglemintoday
posted Hide Post
LOL awesome!

I'm thinking he didn't run far

Good one Gumboot !


"Let me start off with two words: Made in America"
 
Posts: 3326 | Location: Permian Basin | Registered: 16 December 2006Reply With Quote
One of Us
Picture of gumboot458
posted Hide Post
....It heart was a spray on the grass It was quite a temporary cavity


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
One of Us
Picture of gumboot458
posted Hide Post
...I should have resized that Confused


.If it can,t be grown , its gotta be mined ....
 
Posts: 3445 | Location: Copper River Valley , Prudhoe Bay , and other interesting locales | Registered: 19 November 2006Reply With Quote
one of us
Picture of Dr. Lou
posted Hide Post
No need to resize. Provides more impact (pun intended) when viewed at that size. It looks like one I shot a few years ago at 100 yards with a 358 Win and a 225 Sierra. Not much damage on the entry side but no neck left on the exit side - just about decapitated it. Lou


****************
NRA Life Benefactor Member
 
Posts: 3316 | Location: USA | Registered: 15 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia