This lot away to Texas this morning. First is a #2 Bushcraft with walnut over curve backed buffalo horn on a 3/16 saber ground 1075 blade with heavy jimping and a leather lanyard in a edge stamped closed top sheath.
Next is a pretty little letter opener with a walnut handle on a 1084 blade in a walnut table stand. The handle and uprights of the table stand are from the same piece of walnut to make a continuous visual line.
A pair of Chamois hunters with Tasmanian blackwood over brass curve backed bolsters in edge stamped pouch sheaths. The blades are engraved on both sides.
the last lot are farm tools called hook knives for hay bailing time when there is bunch up of wither the bailing twine or the hay itself. Made from coil springs that were straightened for the purpose.

A pair of Wapiti Hunters with walnut over CB buffalo horn bolsters on the 1075 blade, with one having spine jimping and both having chocolate snake knot and bead lanyards in closed top sheaths.
A pair of Old Western hunters also with walnut over CB buffalo horn bolster on 1075 blades in pouch sheaths.

Very nice. Good to see you are keeping busy!

A camp knife with OD canvas micarta on the Nitro V stainless blade and a Him 'N' Her steak knife set with aged camel bone with G 10 liner on the Nitroo V stainless blades.

Seeing as I will be doing all the cooking for some time to come I decided that I needed a new chef set and having a re designed pattern I wanted to try decided this would be what I would use for the set. All our knives have been one at a time to test design etc so with different furntiure and patterns, there is nothing matching about them. I had been saving a very nice piece of tight grained broken fiddleback Tasmanian Blackwood so matched it with some bronze and black G10 for the NitroV SS blades. With the 8 inch chef, 6 inch petty chef and the 4 inch paring knife, this set will cover all the bases.