THE ACCURATERELOADING.COM FAVORITE LOADS FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Talk to me about the 7 RUM
 Login/Join
 
One of Us
posted
What's THE load?
 
Posts: 3427 | Registered: 05 August 2008Reply With Quote
One of Us
posted Hide Post
THE load in my rifle might be the NOT load in yours but heres a try.
140gr AB 91grs imr 7828 cci 250
150gr NBT 96gr Retumbo Fed 215
160gr sie BTHP 88gr imr 7828 cci 250
The 140 and 160 loads are shot in my 700 and are VERY accurate.
The 150gr loads are in my hunting buddys 700 CDL. They AVERAGE just under one and one half inch at 300yds! HE has a nikon buckmaster with the BDC. Zeroed dead on at 300 on 18 power, his first circle is dead on at 400 seconed at 500 third at 600. This is not calculated this is shot on several occasions. With no wind. Still have one circle left, maybe 750.Hope this helps.Good luck. Henry
 
Posts: 85 | Registered: 04 February 2009Reply With Quote
One of Us
posted Hide Post
Thanks Henry.

Have you chrono'd any of your loads?
 
Posts: 3427 | Registered: 05 August 2008Reply With Quote
one of us
Picture of ROSCOE
posted Hide Post
I believe I had the best results with H869….I believe that is the powder that replaced 870? Anyhow in my rifle it shot better than Retumbo with 140 grain bullets. I ran into pressure issues prior to reaching the max loads in the Hogden load data however velocity as I remember was on par with max listed loads. My rifle is a Remington 700 factory gun.


******************************************************************
R. Lee Ermey: "The deadliest weapon in the world is a Marine and his rifle."
******************************************************************
We're going to be "gifted" with a health care plan we are forced to purchase and fined if we don't, Which purportedly covers at least ten million more people, without adding a single new doctor, but provides for 16,000 new IRS agents, written by a committee whose chairman says he doesn't understand it, passed by a Congress that didn't read it but exempted themselves from it, and signed by a President, with funding administered by a treasury chief who didn't pay his taxes, for which we'll be taxed for four years before any benefits take effect, by a government which has already bankrupted Social Security and Medicare, all to be overseen by a surgeon general who is obese, and financed by a country that's broke!!!!! 'What the hell could possibly go wrong?'
 
Posts: 2122 | Location: Arkansas | Registered: 03 June 2000Reply With Quote
one of us
Picture of Canadian reloarder
posted Hide Post
My son has a 7mmRUM that I reload for. Since it is used primarly for moose hunting we went with a 175 gr Partion. We used 97grs of H5010, a Fed 215 and got MOA accuracy. Our vel is 3125 ft/sec from a 26" barrel


"300 Win mag loaded with a 250 gr Barnes made a good deer load". Elmer Keith
 
Posts: 172 | Location: Canada | Registered: 06 August 2003Reply With Quote
One of Us
Picture of youngoutdoors
posted Hide Post
A buddy of mine at Remington told me once that they only recommended IMR7828. Had to do with the pressure curve. Some powders caused small dents in the shoulder of the cases. Good Luck, Louis
 
Posts: 1381 | Location: Mountains of North Carolina | Registered: 14 January 2008Reply With Quote
One of Us
posted Hide Post
Thanks Gentlemen,

I had a feeling that the cartridge would be similar in it's preferences to the .264 Win Mag....
 
Posts: 3427 | Registered: 05 August 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia