<JoeM> posted 21 May 2001 19:28
Here is a round that might make that '06 shoot like a house-a-fire!!
New Winchester Brass CCI Large Benchrest Primers 49.0 grains of IMR-4064 165 grain Nosler Ballistic Tip COL= 3.213"
Browning 1st generation Abolt, 3-12x Redfield Ultimate Illuminator
This round, if I do my part, will land three of them in a group .3"
This is a listed max, work up to it.
------------------ Safety & Ethics,Accuracy, Velocity, Energy Joe M
one of us Day in and day out working laod I would use 55gr of Rel 19 and a 180 gr Hornady Spire Point in WW cases with CCI 200 primers.
------------------ May I be half the man my dog thinks I am.
Posts: 4002 | Location: Hudsonville MI USA | Registered: 08 June 2000
IP
one of us quote: Originally posted by JoeM:This round, if I do my part, will land three of them in a group .3"
This is a listed max, work up to it.
What velocities do you get?
Posts: 1246 | Location: Northern Virginia, USA | Registered: 02 June 2001
IP
<JoeM> posted 20 June 2001 08:59
John,
The book says 2720fps. They use a 26 inch barrel, mine has a 22 inch, so less, but they were developed before I bought my chrono, so I dont know out of my rifle.
------------------ Safety & Ethics,Accuracy, Velocity, Energy Joe M
<brassloader> posted 24 June 2001 05:22
Winchester brass and large primer,62gr. RL19,165gr. Nosler Partition seated .030 off lands.Accurate in my A-Bolt.
one of us Federal cases, Win primer, any 4350, 56 grs, Speer 165 grs Spitzer. Mild load, works just fine. H
<Bill> posted 27 June 2001 16:12
In my Sako L691:
180 Hornandy Spire Point 58.0 IMR 4350 Fed Nickel Brass WLR