The Accurate Reloading Forums
30-06 General Purpose Round

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/30510109

21 May 2001, 19:28
<JoeM>
30-06 General Purpose Round
Here is a round that might make that '06 shoot like a house-a-fire!!

New Winchester Brass
CCI Large Benchrest Primers
49.0 grains of IMR-4064
165 grain Nosler Ballistic Tip
COL= 3.213"

Browning 1st generation Abolt, 3-12x Redfield Ultimate Illuminator

This round, if I do my part, will land three of them in a group .3"

This is a listed max, work up to it.

------------------
Safety & Ethics,Accuracy, Velocity, Energy
Joe M

20 June 2001, 04:45
Terry Blauwkamp
Day in and day out working laod I would use 55gr of Rel 19 and a 180 gr Hornady Spire Point in WW cases with CCI 200 primers.

------------------
May I be half the man my dog thinks I am.

20 June 2001, 08:52
John Frazer
quote:
Originally posted by JoeM:

This round, if I do my part, will land three of them in a group .3"

This is a listed max, work up to it.


What velocities do you get?

20 June 2001, 08:59
<JoeM>
John,
The book says 2720fps. They use a 26 inch barrel, mine has a 22 inch, so less, but they were developed before I bought my chrono, so I dont know out of my rifle.

------------------
Safety & Ethics,Accuracy, Velocity, Energy
Joe M

24 June 2001, 05:22
<brassloader>
Winchester brass and large primer,62gr. RL19,165gr. Nosler Partition seated .030 off lands.Accurate in my A-Bolt.
25 June 2001, 20:00
aHunter
Federal cases, Win primer, any 4350, 56 grs, Speer 165 grs Spitzer. Mild load, works just fine. H
27 June 2001, 16:12
<Bill>
In my Sako L691:

180 Hornandy Spire Point
58.0 IMR 4350
Fed Nickel Brass
WLR