THE ACCURATERELOADING.COM FAVORITE LOADS FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
165 tsx in da 06.
 Login/Join
 
One of Us
posted
The collective cyber grone of yet another 30.06 fave. But I had to share this Because It was so dam easy.

Rem brass. Fire formed neck sized.
Rem 9 1/2 primer.
59gn H4350 (AR2209)
165tsx 30thou ol.

Its a max book charge so be wary there. I went up a bit more in powder but groups opened up dramatically. I was just working up the charge with the idea of "tweaking" the oal but hit this amazing sweet spot between 57-59 grns where the bullets just wanted to go through the same hole.This should be a really good hunting load.Id be interested in any feedback regarding 165grn 06 loads espec. tsx.
 
Posts: 39 | Location: australia | Registered: 30 November 2006Reply With Quote
One of Us
Picture of Ghubert
posted Hide Post
Mate be very careful, this is not the maximum book load it is 4.5 grains over according to the information I have seen.

Have a look at my thread about almost exactly this load. http://forums.accuratereloadin...531081331#2531081331
 
Posts: 11731 | Location: London, UK | Registered: 02 September 2007Reply With Quote
One of Us
posted Hide Post
Thanx Ghubert. That saved a lot of feedback!Yes! 4350's do "kick".But point taken.This is a maximum! And maintain at least 40 thou off the lands.A bit more "freebore" rather than less might surprise.
 
Posts: 39 | Location: australia | Registered: 30 November 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia