The Accurate Reloading Forums
165 tsx in da 06.

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/4911043/m/2921093341

02 November 2010, 08:09
seanshooter
165 tsx in da 06.
The collective cyber grone of yet another 30.06 fave. But I had to share this Because It was so dam easy.

Rem brass. Fire formed neck sized.
Rem 9 1/2 primer.
59gn H4350 (AR2209)
165tsx 30thou ol.

Its a max book charge so be wary there. I went up a bit more in powder but groups opened up dramatically. I was just working up the charge with the idea of "tweaking" the oal but hit this amazing sweet spot between 57-59 grns where the bullets just wanted to go through the same hole.This should be a really good hunting load.Id be interested in any feedback regarding 165grn 06 loads espec. tsx.
03 November 2010, 05:52
Ghubert
Mate be very careful, this is not the maximum book load it is 4.5 grains over according to the information I have seen.

Have a look at my thread about almost exactly this load. http://forums.accuratereloadin...531081331#2531081331
03 November 2010, 12:44
seanshooter
Thanx Ghubert. That saved a lot of feedback!Yes! 4350's do "kick".But point taken.This is a maximum! And maintain at least 40 thou off the lands.A bit more "freebore" rather than less might surprise.